Index Catalog // STAX

Low-cost portable microscopy systems for biomedical imaging and healthcare applications

Schöpfer:: Jiao, Ziao
Datum:: 2024
Department, School or Faculty:: Strathclyde Institute of Pharmacy and Biomedical Sciences and Department of Biomedical Engineering

Creating a real-time movement sonification system for hemiparetic upper limb rehabilitation for survivors of stroke

Schöpfer:: Nown, T.H.
Datum:: 2024
Department, School or Faculty:: Department of Biomedical Engineering

Development of a low-cost postural measurement system to assist during assessment, optimal correction, and casting of the spinal orthosis for scoliosis patients

Schöpfer:: Rayothee, Pitchaya
Datum:: 2024
Funder:: Faculty of Medicine Siriraj Hospital, Mahidol University
Department, School or Faculty:: Department of Biomedical Engineering

Understanding the modulation of walking speed and exploring how this differs in people with Parkinson’s disease.

Schöpfer:: Aldayil, Esraa
Datum:: 2023
Department, School or Faculty:: Department of Biomedical Engineering

Patient-specific computational haemodynamics in the arteriovenous fistula and aorta of a chronic kidney disease cohort

Schöpfer:: Hyde-Linaker, George
Datum:: 2024
Department, School or Faculty:: Department of Biomedical Engineering

Towards patient-specific modelling as a pre-operative planning strategy and follow up assessment for the treatment of advanced heart failure with rotary blood pumps

Schöpfer:: Capoccia, Massimo
Datum:: 2023
Department, School or Faculty:: Department of Biomedical Engineering

The development of an adaptive and reactive interface system for lower limb prosthetic application

Schöpfer:: Bagwell, Jake
Datum:: 2023 and 2022
Funder:: Engineering and Physical Sciences Research Council (EPSRC)
Department, School or Faculty:: Department of Biomedical Engineering

An investigation into silk fibroin for diverse wound healing applications

Schöpfer:: Egan, Gemma
Datum:: 2023
Funder:: Engineering and Physical Sciences Research Council
Department, School or Faculty:: Department of Biomedical Engineering

Evaluation of a collagen-based hydrogel as a delivery system for Parkinson’s disease therapeutics

Schöpfer:: Syntouka, Ioanna Marina
Datum:: 2022 and 2023
Department, School or Faculty:: Department of Biomedical Engineering

Ion beam deposited optical mirror coatings for next generation gravitational wave detectors

Schöpfer:: Wallace, Gavin S.
Datum:: 2023
Department, School or Faculty:: Department of Biomedical Engineering and Precision Measurement Group

Characterisation of bone loss and development of an electrostimulation intervention to improve bone health in adults with spinal cord injury

Schöpfer:: Abdelrahman, Shima
Datum:: 2022 and 2023
Department, School or Faculty:: Department of Biomedical Engineering

Development of novel antioxidant drug-free coronary artery stent coatings

Schöpfer:: Longhorn, Daniel
Datum:: 2023
Funder:: Engineering and Physical Sciences Research Council and Centre for Doctoral Training in Medical Device and Health Technologies
Department, School or Faculty:: Department of Biomedical Engineering and Centre for Doctoral Training in Medical Device and Health Technologies

Hypergravitational stimulation of cell differentiation

Schöpfer:: McLennan, Samuel
Datum:: 2022
Department, School or Faculty:: Department of Biomedical Engineering

Prosthetic mechanobiology : how prosthesis-related loading can influence skeletal muscle health

Schöpfer:: Sargent, Marisa
Datum:: 2023
Department, School or Faculty:: Department of Biomedical Engineering

Monitoring and analysis of motion at the hand/wrist during repetitive activities associated with cumulative trauma disorders (CTD)

Schöpfer:: Ugbolue, Ukadike Chris
Datum:: 2003
Department, School or Faculty:: Department of Biomedical Engineering

A computer assisted model for orthotic management of the diabetic foot in the early stages of the disease

Schöpfer:: Diaz, Martha Lucia Zequera
Datum:: 2003
Department, School or Faculty:: Department of Biomedical Engineering

Protocol development for somatotopic sensory mapping of deep brain nuclei during stereotaxic neurosurgery

Schöpfer:: McDonald, Alexis
Datum:: 2003
Department, School or Faculty:: Department of Biomedical Engineering

Design of a feedback reminder system for stroke patients with Heminglect

Schöpfer:: Douglas, Callum
Datum:: 2002
Department, School or Faculty:: Department of Biomedical Engineering

Improving understanding of acute recurrent tonsillitis through 3D bioprinting of bacterial biofilms

Schöpfer:: Denton, Oliver
Datum:: 2022 and 2023
Department, School or Faculty:: Department of Biomedical Engineering

Tissue engineering of lymphatic vessel networks with nanofibre reinforced hydrogel constructs

Schöpfer:: Laco, Filip
Datum:: 2013
Funder:: University of Strathclyde
Department, School or Faculty:: Department of Biomedical Engineering

Dynamic mechanical analysis of articular cartilage using nanoindentation

Schöpfer:: Moore, David Bryant Jr.
Datum:: 2015
Department, School or Faculty:: Department of Biomedical Engineering

Engineering of artificial bone tissues

Schöpfer:: Mohamad, Mohd Riduan
Datum:: 2016
Department, School or Faculty:: Department of Biomedical Engineering

Coaxial extrusion of fine diameter tissue filaments

Schöpfer:: Logan, Jack William
Datum:: 2023
Department, School or Faculty:: Department of Biomedical Engineering

Biomechanical evaluation and comparison of microprocessor and mechanical prosthetic knee mechanisms

Schöpfer:: Crimin, Anthony
Datum:: 2014
Department, School or Faculty:: Department of Biomedical Engineering

Ultrasound imaging for robotic knee arthroplasty

Schöpfer:: Kerr, William
Datum:: 2016
Department, School or Faculty:: Department of Biomedical Engineering

A pilot study investigating the effect of ankle-foot orthosis (AFO) stiffness on walking patterns of patients with ankle impairment

Schöpfer:: Ruthiraphong, Peeraya
Datum:: 2017
Department, School or Faculty:: Department of Biomedical Engineering

Cobalt toxicity mechanisms in neural cells and brain tissue: understanding the implications for patients with cobalt-chromium alloy orthopaedic implants

Schöpfer:: Gomez-Arnaiz, Sara
Datum:: 2022
Department, School or Faculty:: Department of Biomedical Engineering

Development of a modular microfluidic platform for customisable in vitro neuroscience models

Schöpfer:: Megarity, Daniel Jackson
Datum:: 2022
Funder:: Engineering and Physical Sciences Research Council and Centre for Doctoral Training in Medical Devices and Health Technologies
Department, School or Faculty:: Department of Biomedical Engineering and Centre for Doctoral Training in Medical Devices and Health Technologies

Inter-muscular coherence and neurogenic tremor as tools to evaluate the effects of motor training, transcranial stimulation and peripheral stimulation on cortical activity

Schöpfer:: Axford, Pauline
Datum:: 2016
Department, School or Faculty:: Department of Biomedical Engineering

Characterising spinal cord injury-induced osteoporosis in a rat model using micro computed-tomography and histology

Schöpfer:: Lachendro, Flynn
Datum:: 2022
Department, School or Faculty:: Department of Biomedical Engineering

3D biofabrication of constructs for orthopaedic tissue regeneration and clinical biofilm study

Schöpfer:: Turnbull, Gareth Stephen
Datum:: 2022
Department, School or Faculty:: Department of Biomedical Engineering

DeSIPhER: developing schizophrenia identification using physiological EEG responses

Schöpfer:: Mohanty, Sibani Priyadarshini
Datum:: 2022
Department, School or Faculty:: Department of Biomedical Engineering

Central nervous system organisation following traumatic incomplete spinal cord injury (iSCI) : a longitudinal clinical study

Schöpfer:: Izzeldin, Isameldin M. H.
Datum:: 2018 and 2022
Funder:: International Spinal Research Trust
Department, School or Faculty:: Department of Biomedical Engineering

Comparison of functional and qualitative data following robot assisted therapy and modified constraint induced movement therapy with sub-acute stroke patients : a pilot randomised controlled trial

Schöpfer:: Sweeney, Gillian M.
Datum:: 2022
Department, School or Faculty:: Department of Biomedical Engineering

Digital technologies for contrast and colour vision testing

Schöpfer:: Vivas-Mateos, Guillermo
Datum:: 2022
Department, School or Faculty:: Department of Biomedical Engineering

Cystic fibrosis patient monitor

Schöpfer:: Donnelly, Sean
Datum:: 2022
Funder:: The Engineering and Physical Sciences Research Council (EPSRC)
Department, School or Faculty:: Department of Biomedical Engineering

The effect of variable resistance training for the post activation performance enhancement of the countermovement jump

Schöpfer:: Law, Ewan
Datum:: 2022
Department, School or Faculty:: Department of Biomedical Engineering

Application of dynamic mode decomposition in MI-BCI

Schöpfer:: Zapotoczny, Lukasz
Datum:: 2022
Department, School or Faculty:: Department of Biomedical Engineering

Development of a clinically-targeted human activity recognition system to aid the prosthetic rehabilitation of individuals with lower limb amputation in free living conditions

Schöpfer:: Jamieson, Alexander
Datum:: 2021 and 2022
Funder:: PAL Technologies Ltd
Department, School or Faculty:: Department of Biomedical Engineering

Design and development of a 3D printed electrochemical sensor for the detection of Pseudomonas Aeruginosa

Schöpfer:: McLean, Caitlin
Datum:: 2022
Department, School or Faculty:: Centre for Doctoral Training in Medical Devices and Health Technologies and Department of Biomedical Engineering

Hardware tools for optogenetic neuroscience experimentation

Schöpfer:: Winstanley, Ruaridh
Datum:: 2021 and 2022
Department, School or Faculty:: Institute of Photonics, Centre for Doctoral Training in Medical Devices and Health Technologies, Department of Physics, Department of Biomedical Engineering, and Strathclyde Institute of Medical Devices

Closed-loop control of anaesthesia

Schöpfer:: Mantzaridis, Haralambos
Datum:: 1996
Department, School or Faculty:: Department of Biomedical Engineering

Development of an in-dressing wound infection sensor

Schöpfer:: Hannah, Aiden James
Datum:: 2022
Funder:: Engineering and Physical Sciences Research Council
Department, School or Faculty:: Department of Biomedical Engineering

Clinical investigation of the functional outcome of fixed bearing versus mobile bearing knees

Schöpfer:: Govind, Cheral
Datum:: 2022
Department, School or Faculty:: Department of Biomedical Engineering

A study on the tolerance of intermittent hypoxia training and its effect on sensory and motor spinal pathways

Schöpfer:: Toli, Agioula
Datum:: 2021
Department, School or Faculty:: Department of Biomedical Engineering

Developing a means of marking and assessing impairments in the processing of linguistic prosody in Parkinson's Disease

Schöpfer:: Barbour, Alexander Stephen
Datum:: 2022
Department, School or Faculty:: Department of Biomedical Engineering

Towards the development of a spectroscopic point-of-care device for early disease detection and clinical diagnosis

Schöpfer:: Confield, Lily Rose
Datum:: 2022 and 2021
Department, School or Faculty:: Department of Biomedical Engineering

Development of feature extraction algorithms for real-time brain computer interface

Schöpfer:: Arnin, Jetsada
Datum:: 2022 and 2021
Funder:: Thailand Institute of Scientific and Technological Research (TISTR)
Department, School or Faculty:: Department of Biomedical Engineering

Design and development of a weight support device for upper limb stroke rehabilitation

Schöpfer:: Collins, Ross
Datum:: 2021
Funder:: EPSRC Centre for Doctoral Training in Medical Imaging
Department, School or Faculty:: Department of Biomedical Engineering

Electrophysiology of Ion channels in miniaturised systems

Schöpfer:: Salamati, Ali Reza
Datum:: 2020 and 2018
Department, School or Faculty:: Department of Biomedical Engineering

On the quantification and objective classification of instability in the healthy, osteoarthritic and prosthetic knee

Schöpfer:: Wallace, David T.
Datum:: 2019 and 2020
Department, School or Faculty:: Department of Biomedical Engineering

Characterisation of ion-beam deposited thin-film coating materials for use in future gravitational wave observatories

Schöpfer:: Angelova, Svetoslava
Datum:: 2021
Department, School or Faculty:: Department of Biomedical Engineering

Blood flow dynamics in surviving patients with repaired Tetralogy of Fallot

Schöpfer:: Boumpouli, Maria
Datum:: 2021
Department, School or Faculty:: Department of Biomedical Engineering

Developing a microfluidic blood preparation device for ATR-FTIR spectroscopy

Schöpfer:: Radhakrishnan, Pretheepan
Datum:: 2021
Department, School or Faculty:: Department of Mathematics and Statistics, Department of Mechanical and Aerospace Engineering, and Department of Biomedical Engineering

A biphasic diffusion model of drug release from medical implant coatings

Schöpfer:: Quirk, Keelin
Datum:: 2021
Department, School or Faculty:: Department of Biomedical Engineering

Study of the pressure distribution at the prosthesis/stump interface of a new design of socket : a pilot study

Schöpfer:: Al-Saadi, Ali Mufawaq Nsaif
Datum:: 2015
Department, School or Faculty:: Department of Biomedical Engineering

Comparison of the compression release and ischial containment transfemoral prosthetic socket designs using gait analysis : a pilot study

Schöpfer:: Kamil, Mohammed Mustafa
Datum:: 2015
Department, School or Faculty:: Department of Biomedical Engineering

Electrochemical biosensor development for enhanced detection of pathogens which cause sepsis and hyperinflammation

Schöpfer:: Vezza, Vincent
Datum:: 2021
Funder:: Engineering and Physical Sciences Research Council
Department, School or Faculty:: Department of Biomedical Engineering

Development of a DNA biosensor to detect antimicrobial resistance

Schöpfer:: Butterworth, Adrian
Datum:: 2021
Department, School or Faculty:: Department of Biomedical Engineering

The development of an electrochemical sensor for detecting and measuring circulating tumour DNA in human fluids

Schöpfer:: Attoye, Bukola
Datum:: 2021
Funder:: EPSRC Centre for Doctoral Training in Medical Imaging
Department, School or Faculty:: Department of Biomedical Engineering

Development of a novel multi-stage limb salvage technology for the optimisation of tissue viability in severely injured limbs

Schöpfer:: Morton, Joanne
Datum:: 2021 and 2020
Department, School or Faculty:: Department of Biomedical Engineering

Biomechanical study of rigid ankle-foot orthoses in the treatment of stroke patients

Schöpfer:: Alshawabka, Amneh
Datum:: 2020 and 2021
Department, School or Faculty:: Department of Biomedical Engineering

Hardware acceleration using FPGAs for adaptive radiotherapy

Schöpfer:: Robinson, Fraser D.
Datum:: 2021
Department, School or Faculty:: Department of Biomedical Engineering

Combining microfluidics with raman spectroscopy for the study of emerging cancer therapies

Schöpfer:: Melnyk, Jacob.
Datum:: 2021
Department, School or Faculty:: Centre for Doctoral Training in Medical Devices and Health Technologies and Department of Biomedical Engineering

Metal microneedles for transdermal drug delivery

Schöpfer:: Salamati, Mohammad Reza
Datum:: 2018
Department, School or Faculty:: Department of Biomedical Engineering

Gait stability and balance strategies of both acquired and congenital lower limb prosthetic users in response to perturbations

Schöpfer:: Alfatafta, Mahmoud
Datum:: 2021 and 2020
Funder:: University of Jordan
Department, School or Faculty:: Department of Biomedical Engineering

A bioelectronic approach to post-surgical anastomotic leakage diagnosis

Schöpfer:: Paulinus, Joshua Antony.
Datum:: 2021
Department, School or Faculty:: Department of Biomedical Engineering

Nanoindentation and atomic force microscopy surface characterisation of human femoral head articular cartilage

Schöpfer:: Austin, Megan
Datum:: 2013
Department, School or Faculty:: Department of Biomedical Engineering

Towards non-invasive characterisation of re-endothelialisation and restenosis following coronary stenting : an in vitro investigation using impedance spectroscopy

Schöpfer:: Holland, Ian
Datum:: 2017
Department, School or Faculty:: Department of Biomedical Engineering

Development of a minimally invasive sliding hip screw

Schöpfer:: Gilroy, Daniel
Datum:: 2015
Department, School or Faculty:: Department of Biomedical Engineering

Design and development of an electrochemical and infrared spectroscopic medical device for serum-based cancer diagnostics

Schöpfer:: Rinaldi, Christopher
Datum:: 2020
Department, School or Faculty:: Department of Biomedical Engineering and Centre for Doctoral Training in Medical Devices and Health Technologies

The inertial properties of the German Shepherd

Schöpfer:: Jones, O. Yvette
Datum:: 2015
Funder:: British Columbia Institute of Technology and Vancouver Police Foundation
Department, School or Faculty:: Department of Biomedical Engineering

The biomechanical interaction between sports players and artificial turf for the development of a validated artificial turf testing rig

Schöpfer:: Blackburn, Steven
Datum:: 2012
Department, School or Faculty:: Department of Biomedical Engineering

Development and clinical bench testing of a Matlab based, user friendly, deployable software application for automatic batch processing of fully instrumented three-dimensional human movement biomechanics data

Schöpfer:: Corbett, John
Datum:: 2015
Department, School or Faculty:: Department of Biomedical Engineering

Automated determination of the theoretical range of hip motion prior to total hip arthroplasty using 3D models created from pelvic CT scans

Schöpfer:: Walter, Ségolène
Datum:: 2015
Department, School or Faculty:: Department of Biomedical Engineering

The design and development of a high-throughput ATR-FTIR serum diagnostics platform

Schöpfer:: Finlayson, Duncan E.
Datum:: 2020
Department, School or Faculty:: Centre for Doctoral Training in Medical Devices and Health Technologies and Department of Biomedical Engineering

Investigation into the relationship between blunt impacts and bruising

Schöpfer:: Black, Heather Ilona
Datum:: 2017
Department, School or Faculty:: Department of Biomedical Engineering

Optimisation of 405 nm HINS-light technology for the development of patient-safe decontamination in arthroplasty surgery

Schöpfer:: Ramakrishnan, Praveen.
Datum:: 2015
Department, School or Faculty:: Department of Biomedical Engineering, Department of Electronic and Electrical Engineering, Robertson Trust Laboratory of Electronic Sterilisation, and Centre for Doctoral Training in Medical Devices and Health Technologies

Biocompatibility assessment of a sol-gel modified electrospun ventricular shunt catheter

Schöpfer:: Erbogasto, Davide
Datum:: 2020
Department, School or Faculty:: Department of Biomedical Engineering

Suchen

Suchergebnisse

Suche beschränken