Index Catalog // STAX

Feasibility study of a hybrid process for improving cold incremental sheet forming of titanium alloy

Creador:: McPhillimy, Michael Thomas
Fecha:: 2024
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Robust perception and detection systems for micro aerial vehicle based intelligent visual inspection in complex environments

Creador:: Yu, Leijian
Fecha:: 2023
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Achieving quality medical equipment in developing countries through remanufacturing

Creador:: Eze, Solomon Chika
Fecha:: 2021 and 2020
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

The creation of a framework for assessing innovation capability maturity of supply chains. Analysing the status quo and developing an improvement strategy for the Scottish aerospace industry during the Covid-19 pandemic

Creador:: Reckordt, Tim
Fecha:: 2023
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

The formulation of public policy framework : encouraging effective collaboration within the electric bus research and manufacturing cluster to accelerate the adoption of electric buses in Thailand

Creador:: Preedakorn, Kantapich
Fecha:: 2023 and 2022
Funder:: Office of National Higher Education Science Research and Innovation Policy Council (NXPO) and Royal Thai Government, Ministry of Science, Technology, and Innovation
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management and Faculty of Engineering

Traces of emergence: an ontological unification of perception, artefact, and process

Creador:: Urquhart, Lewis
Fecha:: 2022
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

A flexible single-step 3D nanolithography approach via local anodic oxidation : theoretical and experimental studies

Creador:: Gao, Jian
Fecha:: 2023
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

UWB based high precision localisation technology for the low cost autonomous UAV inspection in GPS-denied and extremely confined environments

Creador:: Yang, Beiya
Fecha:: 2023
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Eta (η) phase precipitation during forging and heat treatment of ATI 718Plus®

Creador:: Hassan, Bilal
Fecha:: 2023
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

A decision-making model for sustainable supplier evaluation and selection

Creador:: Sriual, Napat
Fecha:: 2022
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Perceptions of blockchain adoption in the oil and gas supply chain : a qualitative UTAUT investigation

Creador:: Uba, Salisu Alhaji
Fecha:: 2023
Funder:: Petroleum Technology Development Fund
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Novel experimental methodology for the investigation of recrystallisation during industrial hot forging of Inconel 718

Creador:: Stefani, Nicola
Fecha:: 2020
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

High Value Meetings : a new approach for business meeting performance

Creador:: Marshall, Pamela
Fecha:: 2023
Funder:: Engineering and Physical Sciences Research Council (EPSRC)
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Exploring and monitoring interviewers' cognitive processes of decision making using think aloud method

Creador:: Zhao, Shiyun
Fecha:: 2023
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Cognitive processes of similarity and combination in conceptual product design engineering

Creador:: McTeague, Christopher
Fecha:: 2022 and 2023
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Customer-driven remanufacturability decision-making in the medical devices sector

Creador:: Akano, Damola Ikeoluwa
Fecha:: 2022
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Life cycle and ultrasonic based non-destructive analysis of recycled and remanufactured carbon fibre reinforced plastic composite

Creador:: Paterson, David Alexander Peter
Fecha:: 2018
Funder:: University of Strathclyde
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management and Advanced Forming Research Centre

A new sustainability assessment approach in manufacturing a stakeholders' role

Creador:: Rasheed, Aamir
Fecha:: 2022
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Online defect detection using a high-speed multi-sensor data fusion system for laser metal deposition

Creador:: Qureshi, Ahmed Murtaza
Fecha:: 2021 and 2022
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Industry 4.0 and augmenting the millennial worker

Creador:: Smith, Eleanor
Fecha:: 2022
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Laser metal deposition of the Ti-5553 alloy on forged substrate for aerospace applications

Creador:: Hicks, Calumn
Fecha:: 2021 and 2022
Department, School or Faculty:: Advanced Forming Research Centre and Department of Design, Manufacturing and Engineering Management

The influence of mood during incubation on subsequent design ideation

Creador:: Campbell, Gerard
Fecha:: 2021
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Evolution of globularisation in Ti-6Al-4V alloy during secondary cogging operations under industrial scale conditions

Creador:: Fabris, Mathieu
Fecha:: 2022
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Tiv-Model : an empirically validated design methodology for complex space systems

Creador:: Melville, Craig Montomery
Fecha:: 2021 and 2022
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Happiness sells : the impact of emotional pareidolic face configurations on cognition, product perception and consumer attitudes

Creador:: Noble, Erin
Fecha:: 2021 and 2022
Department, School or Faculty:: School of Psychological Sciences and Health and Department of Design, Manufacturing and Engineering Management

Investigating tangible and experiential design priorities for people living with chronic medical hair loss (alopecia), when acquiring, wearing, cleaning, maintaining and disposing of hair prosthesis (wigs)

Creador:: Moore-Millar, Karena
Fecha:: 2022 and 2021
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

The identification of the effect of high rate deformation on the microstructure and properties of titanium alloys

Creador:: Ntovas, Michail
Fecha:: 2022 and 2019
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management and Advanced Forming Research Centre

Forming miniature ceramic components using micro-forming and a field activated sintering technique (Micro-FAST)

Creador:: Hijji, Hasan Hamza
Fecha:: 2022
Funder:: Seventh Framework Programme, Umm Al-Qura University, and Ministry of Education – Kingdom of Saudi Arabi
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

A cost effective approach to enhance surface integrity and fatigue life of precision milled forming and forging dies

Creador:: Reimer, Andreas
Fecha:: 2019
Funder:: Advanced Forming Research Centre and Evans, Dorothy
Department, School or Faculty:: Advanced Forming Research Centre and Department of Design, Manufacturing and Engineering Management

An exploration of the drivers and indicators of emergence in the offshore wind power industry

Creador:: Andrews, Colin
Fecha:: 2020
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Inspection models for automotive parts remanufacture

Creador:: Harris, Ross Stephen
Fecha:: 2020
Department, School or Faculty:: Strathclyde Remanufacturing Research Group and Department of Design, Manufacturing and Engineering Management

Path planning, modelling and simulation for energy optimised mobile robotics

Creador:: Niu, Cong
Fecha:: 2021
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Laser processing of carbon fibre reinforced plastic (CFRP)

Creador:: Arshed, Farhan
Fecha:: 2021
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

An investigation of mechanics in nanomachining of Gallium Arsenide

Creador:: Fan, Pengfei.
Fecha:: 2021
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management and Centre for Precision Manufacturing

Design considerations for light weight mechanical parts

Creador:: McMaster, Thomas Alistair Michael
Fecha:: 2021
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Model for green supply chain adoption : an empirical analysis of industrial sectors in MENA developing countries

Creador:: Hanna, Hany
Fecha:: 2021
Funder:: Arab Academy for Science, Technology and Maritime Transport
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Development of capability maturity framework for manufacturing research centres

Creador:: Uflewska, Olga
Fecha:: 2021
Department, School or Faculty:: Department of Design, Manufacturing and Engineering Management

Simultaneous cutting of two separate sheets using plasma and parameters optimisation

Creador:: Gani, Adel.
Fecha:: 2021
Department, School or Faculty:: Advanced Forming Research Centre, Faculty of Engineering, and Department of Design, Manufacturing and Engineering Management

A systematic technology evaluation and selection method for computer-supported collaborative design

Creador:: Brisco, Ross.
Fecha:: 2021
Department, School or Faculty:: Faculty of Engineering and Department of Design, Manufacturing and Engineering Management

The influence of sheet conditions on the formability of titanium alloys at room temperature

Creador:: James, Kwame Sefakor
Fecha:: 2021
Department, School or Faculty:: Advanced Forming Research Centre and Department of Design, Manufacturing and Engineering Management

Image processing for the analysis of TI-6AL-4V microstructures

Creador:: Campbell, Andrew.
Fecha:: 2019
Department, School or Faculty:: Advanced Forming Research Centre and Department of Design, Manufacturing and Engineering Management

An empirical feasibility assessment for incremental sheet forming

Creador:: Siddiqi, Muftooh Ur Rehman.
Fecha:: 2016
Department, School or Faculty:: Advanced Forming Research Centre and Department of Design, Manufacturing and Engineering Management

Computational generation of wear maps for H13 tool steel in open die hot forging

Creador:: Marashi, James.
Fecha:: 2019
Department, School or Faculty:: Advanced Forming Research Centre and Department of Design, Manufacturing and Engineering Management

Monitoring of incremental rotary forming

Creador:: Appleby, Andrew.
Fecha:: 2019
Department, School or Faculty:: Advanced Forming Research Centre and Department of Design, Manufacturing and Engineering Management

Buscar

Resultados de la búsqueda

Limite su búsqueda