Index Catalog // STAX

1. Development of guidelines for exhaust system design from fundamental gas dynamics studies

Creator:: Bush, Philip David
Date:: 2000
Department, School or Faculty:: Department of Mechanical Engineering

2. The modelling and simulation of energy management control systems

Creator:: MacQueen, John
Date:: 1997
Department, School or Faculty:: Department of Mechanical Engineering

3. A study of two-phase flow in a large diameter horizontal pipeline and the measurement of interfacial level gradient in smooth stratified flow conditions

Creator:: Ali, Essaied Masoud
Date:: 1992
Department, School or Faculty:: Department of Mechanical Engineering

4. On-orbit manoeuvring using superquadric potential fields

Creator:: Badawy, Ahmed
Date:: 2007
Department, School or Faculty:: Department of Mechanical Engineering

5. Limit and shakedown analysis of structures by the finite element method

Creator:: Shi, Jinhua
Date:: 1996
Department, School or Faculty:: Department of Mechanical Engineering

6. Flooding and non-equilibrium in counter-current flows with reference to pressurised water reactors

Creator:: Megahed Mohamed M.M
Date:: 1982 and 1981
Department, School or Faculty:: Department of Mechanical Engineering

7. Measurement and finite element modelling of temperatures in welding processes

Creator:: Tan, Cheng Peng Henry
Date:: 2005
Department, School or Faculty:: Department of Mechanical Engineering

8. A study of the behaviour of pressurized piping elbows

Creator:: Lubis, Asnawi
Date:: 2003
Department, School or Faculty:: Department of Mechanical Engineering

9. Theoretical and experimental investigations of multiphase flow in safety relief valves

Creator:: Elmayyah, Wael Mohammed Ahmed Ibrahim
Date:: 2010
Department, School or Faculty:: Department of Mechanical Engineering

10. CFD-based erosion modelling of simple and complex geometries

Creator:: Wallace, Malcolm Scott
Date:: 2001
Department, School or Faculty:: Department of Mechanical Engineering

11. Novel computational methods to predict the deformation of macroscopic heterogeneous materials

Creator:: Beveridge, A. J.
Date:: 2011
Department, School or Faculty:: Department of Mechanical Engineering

12. An early history of British military television with special reference to John Logie Baird

Creator:: Hills, Adrian R.
Date:: 2002
Department, School or Faculty:: Department of Mechanical Engineering

13. Support for the integration of simulation in the European Energy Performance of Buildings Directive

Creator:: Kokogiannakis, Georgios
Date:: 2008
Department, School or Faculty:: Department of Mechanical Engineering

14. Applied modelling techniques for welding induced distortions and residual stresses

Creator:: Mollicone,Pierluigi
Date:: 2006
Department, School or Faculty:: Department of Mechanical Engineering

15. Pattern formation in swarming systems using bifurcating potential fields

Creator:: Bennet, Derek James
Date:: 2010
Department, School or Faculty:: Department of Mechanical Engineering

16. Development of 3D erosion-corrosion maps using CFD techniques

Creator:: Abdelrahman, Shehab El-Din Abdelrahman Mohammed
Date:: 2010
Department, School or Faculty:: Department of Mechanical Engineering

17. Modelling and simulation of droplet dynamics in microfluidic devices

Creator:: Liu, Haihu
Date:: 2010
Department, School or Faculty:: Department of Mechanical Engineering

18. Heat and mass transfer within porous building materials

Creator:: Galbraith, Graham H.
Date:: 1992
Department, School or Faculty:: Department of Mechanical Engineering

19. Crashworthiness of Side Impact Beams

Creator:: Wilson, Glen
Date:: 2002
Department, School or Faculty:: Department of Mechanical Engineering

20. Improved prediction methods for finned tube bundle heat exchangers in crossflow

Creator:: McIlwain, Stuart Russell
Date:: 2003
Department, School or Faculty:: Department of Mechanical Engineering

21. Thermal energy storage for building-integrated photovoltaic components

Creator:: Al-Mosawi, Alaa Liaq Hashem
Date:: 2011
Department, School or Faculty:: Department of Mechanical Engineering

22. The development of titanium nitride strengthened creep resistant ferritic steels

Creator:: Pugh, John A.
Date:: 2000
Department, School or Faculty:: Department of Mechanical Engineering and Metallurgy and Engineering Materials Group

23. A theoretical study of rotor forces and torques in helical twin screw compressors

Creator:: You, Cheng Xiang
Date:: 1994
Department, School or Faculty:: Department of Mechanical Engineering

24. The development, implementation, and application of Demand Side Management and control (DSM+c) algorithm for integrating micro-generation system within built environment

Creator:: Hong, Jun
Date:: 2009
Department, School or Faculty:: Department of Mechanical Engineering

25. Decision support for new and renewable energy systems deployment

Creator:: Smith, Nicola Anne Visocchi
Date:: 2002
Department, School or Faculty:: Department of Mechanical Engineering

26. An investigation into base bleed for drag reduction in bluff two-box sports utility vehicles

Creator:: Lamond, Andrew
Date:: 2009
Department, School or Faculty:: Department of Mechanical Engineering

27. Extending the applicability of the Navier-Stokes equations to micro gas flows by considering molecular collisions with boundaries

Creator:: Arlemark, Erik Johan
Date:: 2010
Department, School or Faculty:: Department of Mechanical Engineering

28. Finite volume stress analysis of doubly-curved thick shell

Creator:: Amenyah, William Kwesi
Date:: 1998
Department, School or Faculty:: Department of Mechanical Engineering

29. Research into the installation of, and optimisation of, turning vanes and drag reduction technology as applied to the Land Rover Discovery MK3 vehicle

Creator:: Kennedy, Johnathan James
Date:: 2009
Department, School or Faculty:: Department of Mechanical Engineering

30. Conflation of computational fluid dynamics and building thermal simulation

Creator:: Negrão, Cezar O. R.
Date:: 1995
Department, School or Faculty:: Department of Mechanical Engineering

31. Web crippling of cold-formed plain channel steel section beams

Creator:: Setiyono, Ir. Harkali
Date:: 1994
Department, School or Faculty:: Department of Mechanical Engineering

32. The adaptive coupling of heat and air flow modelling within dynamic whole-building simulation

Creator:: Beausoleil-Morrison, Ian
Date:: 2000
Department, School or Faculty:: Department of Mechanical Engineering and Energy Systems Research Unit

33. Investigation and validation of vibratory methods for stress relieving and weld conditioning

Creator:: Munsi, A. S. M. Younus
Date:: 1999
Department, School or Faculty:: Department of Mechanical Engineering

34. A dynamical systems approach to space-based embedded autonomy

Creator:: Brown, Blair
Date:: 2010
Department, School or Faculty:: Department of Mechanical Engineering

35. Coupled thermo-mechanical modelling of friction stir welding

Creator:: Li, Hongjun
Date:: 2008
Department, School or Faculty:: Department of Mechanical Engineering

36. Hybrid molecular-continuum modelling of nano-scale flows

Creator:: Borg, Matthew Karl
Date:: 2010
Department, School or Faculty:: Department of Mechanical Engineering

37. Some plasticity studies relating to thin-walled beams

Creator:: Lim, Thiam Huat
Date:: 1995
Department, School or Faculty:: Department of Mechanical Engineering

38. A high-order method for computational hypersonic aerothermodynamics

Creator:: Fico, Vincenzo
Date:: 2011
Department, School or Faculty:: Department of Mechanical Engineering

39. Improving the thermal performance of cooling towers by conditioning of air

Creator:: Eju, Magose Abraham
Date:: 2009
Department, School or Faculty:: Department of Mechanical Engineering

40. A physical approach to interfacial strength in fibre reinforced thermoplastic composites

Creator:: Yang, Liu
Date:: 2011
Department, School or Faculty:: Department of Mechanical Engineering

41. The structural design of an all composite motor-glider wing

Creator:: Russell, Jason
Date:: 2005
Department, School or Faculty:: Department of Mechanical Engineering

42. A modelling and experimental study of evaporating two-phase flow on the shellside of shell-and-tube heat exchangers

Creator:: Doo, Gavin H.
Date:: 2005
Department, School or Faculty:: Department of Mechanical Engineering

43. An experimental and numerical invetigation of laminar and turbulent natural convection in vertical parallel-plate channels

Creator:: Yilmaz, Turgut
Date:: 1997
Department, School or Faculty:: Department of Mechanical Engineering

44. Vortex shedding flowmeter pulsating flow CFD studies

Creator:: Scanlon, Thomas J.
Date:: 1992
Department, School or Faculty:: Department of Mechanical Engineering

45. Development of a low cost design toolkit for sizing air-cooled heat exchangers using open source heat transfer correlations

Creator:: Mbaezue, Ugonna Chidera
Date:: 2019
Department, School or Faculty:: Department of Mechanical Engineering

46. Molecular dynamics simulation in arbitrary geometries for nanoscale fluid mechanics

Creator:: Macpherson, Graham Bruce
Date:: 2008
Funder:: Miller Foundation
Department, School or Faculty:: Department of Mechanical Engineering

47. Continuum simulation of fluid flow and heat transfer in gas microsystems

Creator:: O'Hare, Lynne
Date:: 2008
Department, School or Faculty:: Department of Mechanical Engineering

48. Local loading and saddle supports on cylindrical vessels : (some analytical and finite element studies of local load and saddle support problems with a special emphasis towards generating improved design methods)

Creator:: Nash, David Hugh
Date:: 1999
Department, School or Faculty:: Department of Mechanical Engineering

49. Advanced numerical techniques to simulate soil-tool interface problems

Creator:: Aboelnor, Mootaz E.
Date:: 2002
Department, School or Faculty:: Department of Mechanical Engineering

50. Experimental and analytical studies of cold-formed thin-walled frameworks with semi-rigid connections

Creator:: Tan, S. H.
Date:: 1991
Department, School or Faculty:: Department of Mechanical Engineering

Search Constraints

Search Results

1. Development of guidelines for exhaust system design from fundamental gas dynamics studies

2. The modelling and simulation of energy management control systems

3. A study of two-phase flow in a large diameter horizontal pipeline and the measurement of interfacial level gradient in smooth stratified flow conditions

4. On-orbit manoeuvring using superquadric potential fields

5. Limit and shakedown analysis of structures by the finite element method

6. Flooding and non-equilibrium in counter-current flows with reference to pressurised water reactors

7. Measurement and finite element modelling of temperatures in welding processes

8. A study of the behaviour of pressurized piping elbows

9. Theoretical and experimental investigations of multiphase flow in safety relief valves

10. CFD-based erosion modelling of simple and complex geometries

11. Novel computational methods to predict the deformation of macroscopic heterogeneous materials

12. An early history of British military television with special reference to John Logie Baird

13. Support for the integration of simulation in the European Energy Performance of Buildings Directive

14. Applied modelling techniques for welding induced distortions and residual stresses

15. Pattern formation in swarming systems using bifurcating potential fields

16. Development of 3D erosion-corrosion maps using CFD techniques

17. Modelling and simulation of droplet dynamics in microfluidic devices

18. Heat and mass transfer within porous building materials

19. Crashworthiness of Side Impact Beams

20. Improved prediction methods for finned tube bundle heat exchangers in crossflow

21. Thermal energy storage for building-integrated photovoltaic components

22. The development of titanium nitride strengthened creep resistant ferritic steels

23. A theoretical study of rotor forces and torques in helical twin screw compressors

24. The development, implementation, and application of Demand Side Management and control (DSM+c) algorithm for integrating micro-generation system within built environment

25. Decision support for new and renewable energy systems deployment

26. An investigation into base bleed for drag reduction in bluff two-box sports utility vehicles

27. Extending the applicability of the Navier-Stokes equations to micro gas flows by considering molecular collisions with boundaries

28. Finite volume stress analysis of doubly-curved thick shell

29. Research into the installation of, and optimisation of, turning vanes and drag reduction technology as applied to the Land Rover Discovery MK3 vehicle

30. Conflation of computational fluid dynamics and building thermal simulation

31. Web crippling of cold-formed plain channel steel section beams

32. The adaptive coupling of heat and air flow modelling within dynamic whole-building simulation

33. Investigation and validation of vibratory methods for stress relieving and weld conditioning

34. A dynamical systems approach to space-based embedded autonomy

35. Coupled thermo-mechanical modelling of friction stir welding

36. Hybrid molecular-continuum modelling of nano-scale flows

37. Some plasticity studies relating to thin-walled beams

38. A high-order method for computational hypersonic aerothermodynamics

39. Improving the thermal performance of cooling towers by conditioning of air

40. A physical approach to interfacial strength in fibre reinforced thermoplastic composites

41. The structural design of an all composite motor-glider wing

42. A modelling and experimental study of evaporating two-phase flow on the shellside of shell-and-tube heat exchangers

43. An experimental and numerical invetigation of laminar and turbulent natural convection in vertical parallel-plate channels

44. Vortex shedding flowmeter pulsating flow CFD studies

45. Development of a low cost design toolkit for sizing air-cooled heat exchangers using open source heat transfer correlations

46. Molecular dynamics simulation in arbitrary geometries for nanoscale fluid mechanics

47. Continuum simulation of fluid flow and heat transfer in gas microsystems

48. Local loading and saddle supports on cylindrical vessels : (some analytical and finite element studies of local load and saddle support problems with a special emphasis towards generating improved design methods)

49. Advanced numerical techniques to simulate soil-tool interface problems

50. Experimental and analytical studies of cold-formed thin-walled frameworks with semi-rigid connections

Limit your search

Type

Resource type

Creator

Contributor

Funder

Department, School or Faculty

Date