Index Catalog // STAX

1. Numerical analysis and material selection of functionally graded pipes based on metals and ceramics for deep offshore oil and gas operations in Gulf of Guinea

Creator:: Amos, Simon Olushola
Date:: 2020
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

2. An investigtion into the ability of a kinetic particle-based solver for study of gas flows in micro-scale structures

Creator:: Don Bosco, Ferdin Sagai
Date:: 2019
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

3. Scramjet combustion modeling using eddy dissipation model

Creator:: Hoste, Jimmy-John O. E.
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

4. Quantifying AAAs and developing FEA models for stent grafts

Creator:: Kyriakou, Faidon
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

5. Establishing the optimal conditions for rotating arm erosion testing, materials characterisation and computational modelling of wind turbine blade rain erosion

Creator:: Mackie, Cameron
Date:: 2020
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

6. Experimental investigation of the combined effects of corrosion and mean stress on fatigue strength of low carbon steel

Creator:: Morgantini, Marta
Date:: 2020
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Weir Advanced Research Centre

7. Rarefied gas flows in microscale geometries : a hybrid simulation method

Creator:: Docherty, Stephanie Y.
Date:: 2015
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

8. Station-keeping and orbital transfers in the vicinity of the Moon exploiting quasi-periodic orbit dynamics

Creator:: Duering, Marcel
Date:: 2020
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Advanced Space Concepts Laboratory

9. Characterisation of environmentally friendly fibres for composites

Creator:: Gentles, Fiona Lamont
Date:: 2015
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

10. Analytical methods for satellite constellation reconfiguration and reconnaissance using low-thrust manoeuvres

Creator:: McGrath, Ciara
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

11. Coupling simulation with machine learning for the development of a proactive HVAC system in the manufacturing sector

Creator:: Mawson, Victoria Jayne
Date:: 2020
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

12. On the dynamics of rigid multi-body systems in orbit

Creator:: Pagnozzi, Daniele
Date:: 2015
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

13. Smart deployable space structures

Creator:: Sinn, Thomas
Date:: 2016
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Advanced Space Concepts Laboratory

14. The processing and characterisation of recycled glass fibre composites

Creator:: Nagel, Ulf
Date:: 2016
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

15. Macro-scale space systems for geoengineering

Creator:: Bewick, Russell
Date:: 2013
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Advanced Space Concepts Laboratory

16. Advanced methods of life cycle assessment for space systems

Creator:: Wilson, Andrew Ross
Date:: 2019
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering, Advanced Space Concepts Laboratory, and Aerospace Centre of Excellence

17. Tribo-corrosion maps for steels, titanium and titanium carbide materials

Creator:: Rasool, Ghulam
Date:: 2015
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

18. Friction stir welding simulation, optimization and design

Creator:: Zhou, Xingguo
Date:: 2013
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

19. Low thrust augmented periodic orbits in the two- and three-body problems

Creator:: Arnot, Callum S.
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Advanced Space Concepts Laboratory

20. Structural integrity assessment of engineering components under cyclic loading at high temperature

Creator:: Cho, Nak-Kyun
Date:: 2019
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

21. Micro gas flows : modelling the dynamics of Knudsen layers

Creator:: Dongari, Nishanth
Date:: 2012
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

22. Deterministic numerical simulation of the Boltzmann and kinetic model equations for classical and quantum dilute gases

Creator:: Wu, Lei
Date:: 2013
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

23. The orbital dynamics of advanced planetary observation systems

Creator:: Anderson, Pamela Catherine
Date:: 2013
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

24. Molecular dynamics simulations of liquid flow in and around carbon nanotubes

Creator:: Nicholls, William David
Date:: 2012
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

25. Optimisation of automated gas metal arc fillet welding

Creator:: Cairns, Jonathan
Date:: 2021
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

26. A numerical and experimental study on cavitation in positive displacement pumps and its application in valve design optimization

Creator:: Iannetti, Aldo
Date:: 2015
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

27. Spatiotemporal and temporal forecasting of ambient air pollution levels through data-intensive hybrid artificial neural network models

Creator:: Cabaneros, Sheen McLean S.
Date:: 2020
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

28. Controllability of building systems

Creator:: Khalid, Yousaf Ali
Date:: 2011
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

29. Inverse Dynamics based Energy Assessment and Simulation

Creator:: Murphy, Gavin Bruce
Date:: 2012
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

30. General perturbations methods for orbit propagation with particular application to orbit lifetime analysis

Creator:: Kerr, Emma
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

31. Investigation and model development of pressure relief valve leak tightness

Creator:: Anwar, Ali Ahmed
Date:: 2019
Department, School or Faculty:: Weir Advanced Research Centre and Department of Mechanical and Aerospace Engineering

32. Development and validation of a fatigue-resistant cladding technology

Creator:: Schnier, Gladys
Date:: 2015
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Weir Advanced Research Centre

33. Numerical Optimisation of low alloy steel friction stir welding

Creator:: Ahmad, Bilal
Date:: 2018 and 2019
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

34. Fluid dynamic behaviour of dilute dunaliella salina suspensions in contraction-expansion microfluidic devices : potential implications for tubular phototbioreactors

Creator:: Infante, Vincenzo
Date:: 2019
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Department of Chemical and Process Engineering

35. Regenerating the strength of thermally recycled glass fibres using chemical treatments

Creator:: Sáez-Rodríguez, Eduardo
Date:: 2017
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

36. A study of the metallurgical and mechanical property variability in a dual phase low alloy material

Creator:: Gill, David
Date:: 2017
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

37. Methodologies for the analysis of value from delay-tolerant inter-satellite networking

Creator:: Lowe, Christopher John
Date:: 2017
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

38. Preliminary design methodologies for hybrid propulsion trajectories

Creator:: Owens, Steven Robert
Date:: 2014
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Advanced Space Concepts Laboratory

39. Thermocapillary motion of droplets in complex fluid flows

Creator:: Capobianchi, Paolo
Date:: 2019
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and James Weir Fluids Laboratory

40. The development of an integrated modelling framework to aid with the design of endovascular devices

Creator:: Van Zyl, Martin
Date:: 2015
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

41. Tribology of bio-implants

Creator:: Sharifi, Shayan
Date:: 2013
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

42. Data-based vibration structural health monitoring methodology for composite laminated structures

Creator:: García Cava, David
Date:: 2016
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

43. Atmospheric reentry modelling using an open-source DSMC code

Creator:: Palharini, Rodrigo Cassinel
Date:: 2014
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

44. Advances in an open-source direct simulation Monte Carlo technique for hypersonic rarefied gas flows

Creator:: Ahmad, Abdul Ossman
Date:: 2013
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

45. A chemical approach to regenerating the performance of thermally damaged glass fibres

Creator:: Bashir, Sairah Tahir
Date:: 2019
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

46. Advanced surface engineering : evaluation of SprayStir

Creator:: Peat, Tom
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

47. Computational fluid dynamics study of erosion processes

Creator:: Lopez Garcia, Alejandro
Date:: 2017
Funder:: Weir Group
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

48. Towards an improved representation of building occupant's thermal interaction, integrating detailed occupant thermal models within building simulation

Creator:: Rida, Mohamad
Date:: 2020
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Energy Systems Research Unit

49. Study on structural integrity of welded components using the LMM

Creator:: Puliyaneth, Manu
Date:: 2020
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Structural Integrity and Lifetime Assessment (SILA) Research Group

50. Investigation of the strength loss of heat treated glass fibre

Creator:: Jenkins, Peter George
Date:: 2016
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

Search Constraints

Search Results

1. Numerical analysis and material selection of functionally graded pipes based on metals and ceramics for deep offshore oil and gas operations in Gulf of Guinea

2. An investigtion into the ability of a kinetic particle-based solver for study of gas flows in micro-scale structures

3. Scramjet combustion modeling using eddy dissipation model

4. Quantifying AAAs and developing FEA models for stent grafts

5. Establishing the optimal conditions for rotating arm erosion testing, materials characterisation and computational modelling of wind turbine blade rain erosion

6. Experimental investigation of the combined effects of corrosion and mean stress on fatigue strength of low carbon steel

7. Rarefied gas flows in microscale geometries : a hybrid simulation method

8. Station-keeping and orbital transfers in the vicinity of the Moon exploiting quasi-periodic orbit dynamics

9. Characterisation of environmentally friendly fibres for composites

10. Analytical methods for satellite constellation reconfiguration and reconnaissance using low-thrust manoeuvres

11. Coupling simulation with machine learning for the development of a proactive HVAC system in the manufacturing sector

12. On the dynamics of rigid multi-body systems in orbit

13. Smart deployable space structures

14. The processing and characterisation of recycled glass fibre composites

15. Macro-scale space systems for geoengineering

16. Advanced methods of life cycle assessment for space systems

17. Tribo-corrosion maps for steels, titanium and titanium carbide materials

18. Friction stir welding simulation, optimization and design

19. Low thrust augmented periodic orbits in the two- and three-body problems

20. Structural integrity assessment of engineering components under cyclic loading at high temperature

21. Micro gas flows : modelling the dynamics of Knudsen layers

22. Deterministic numerical simulation of the Boltzmann and kinetic model equations for classical and quantum dilute gases

23. The orbital dynamics of advanced planetary observation systems

24. Molecular dynamics simulations of liquid flow in and around carbon nanotubes

25. Optimisation of automated gas metal arc fillet welding

26. A numerical and experimental study on cavitation in positive displacement pumps and its application in valve design optimization

27. Spatiotemporal and temporal forecasting of ambient air pollution levels through data-intensive hybrid artificial neural network models

28. Controllability of building systems

29. Inverse Dynamics based Energy Assessment and Simulation

30. General perturbations methods for orbit propagation with particular application to orbit lifetime analysis

31. Investigation and model development of pressure relief valve leak tightness

32. Development and validation of a fatigue-resistant cladding technology

33. Numerical Optimisation of low alloy steel friction stir welding

34. Fluid dynamic behaviour of dilute dunaliella salina suspensions in contraction-expansion microfluidic devices : potential implications for tubular phototbioreactors

35. Regenerating the strength of thermally recycled glass fibres using chemical treatments

36. A study of the metallurgical and mechanical property variability in a dual phase low alloy material

37. Methodologies for the analysis of value from delay-tolerant inter-satellite networking

38. Preliminary design methodologies for hybrid propulsion trajectories

39. Thermocapillary motion of droplets in complex fluid flows

40. The development of an integrated modelling framework to aid with the design of endovascular devices

41. Tribology of bio-implants

42. Data-based vibration structural health monitoring methodology for composite laminated structures

43. Atmospheric reentry modelling using an open-source DSMC code

44. Advances in an open-source direct simulation Monte Carlo technique for hypersonic rarefied gas flows

45. A chemical approach to regenerating the performance of thermally damaged glass fibres

46. Advanced surface engineering : evaluation of SprayStir

47. Computational fluid dynamics study of erosion processes

48. Towards an improved representation of building occupant's thermal interaction, integrating detailed occupant thermal models within building simulation

49. Study on structural integrity of welded components using the LMM

50. Investigation of the strength loss of heat treated glass fibre

Limit your search

Type

Resource type

Creator

Contributor

Funder

Department, School or Faculty

Date