Index Catalog // STAX

1. Plasticity-induced compressive residual stress effects in fatigue and corrosion fatigue

Creator:: Okorokov, Volodymyr
Date:: 2019
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

2. An experimental and numerical investigation of refill friction stir spot welding of aerospace aluminium alloys

Creator:: Draper, Jonathan A. L.
Date:: 2024
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

3. High cycle fatigue and crack arrest analysis of components with compressive residual stress

Creator:: Xiao, Xuran
Date:: 2024
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

4. Performance investigation and enhancement of a novel oscillating foil based building integrated wind energy harvesting system

Creator:: Calautit, Katrina
Date:: 2024
Funder:: University of Strathclyde. Department of Mechanical and Aerospace Engineering
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

5. Fluid dynamic behaviour of dilute dunaliella salina suspensions in contraction-expansion microfluidic devices : potential implications for tubular phototbioreactors

Creator:: Infante, Vincenzo
Date:: 2019
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Department of Chemical and Process Engineering

6. Micro gas flows : modelling the dynamics of Knudsen layers

Creator:: Dongari, Nishanth
Date:: 2012
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

7. Rarefied gas flows in microscale geometries : a hybrid simulation method

Creator:: Docherty, Stephanie Y.
Date:: 2015
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

8. Data-based vibration structural health monitoring methodology for composite laminated structures

Creator:: García Cava, David
Date:: 2016
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

9. Water flow at the nanoscale : a computational molecular and fluid dynamcis investigation

Creator:: Ritos, Konstantinos
Date:: 2014
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

10. Mechanical analysis and simulation of the nitinol ring-stent : assessing the radial strength, fatigue safety and compaction strains

Creator:: Bow, David Russell
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

11. Building 'in' tenant energy performance : a new method of benchmarking variations in patterns of use by building tenure

Creator:: Morton, Emma Mellanie
Date:: 2017
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Energy Systems Research Unit

12. Advanced surface engineering : evaluation of SprayStir

Creator:: Peat, Tom
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

13. Design optimisation of complex space systems under epistemic uncertainty

Creator:: Filippi, Gianluca
Date:: 2024
Funder:: European Commission
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Aerospace Center of Excellence

14. Investigation of novel methods for manufacturing polyimide aerogel stock shape

Creator:: Dayarian, Shima
Date:: 2023
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

15. Aerodynamic optimisation of wind farms using turbulence modelling

Creator:: Barnes, Andrew
Date:: 2023
Funder:: Engineering and Physical Sciences Research Council and States of Guernsey
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

16. Additive layers to suppress delamination in composite laminates

Creator:: Ubago Torres, Miguel
Date:: 2023
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Advance Composites Group (ACG)

17. Investigation of the thermoelastic effect on the satellite panels identified by an industrial problem of de-pointing

Creator:: Ganilova, Olga
Date:: 2022
Funder:: Airbus UK
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

18. Nonlinear feedback controller design methods for actuator and sensor performance limited systems

Creator:: Brindley, Joseph
Date:: 2014
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

19. Text mining and natural language processing for the early stages of space mission design

Creator:: Berquand, Audrey
Date:: 2022 and 2021
Funder:: European Space Agency
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Intelligent Computational Engineering Laboratory

20. Critical review of subsea structures in the Gulf of Guinea : “Finite element analysis to predict the behaviour of a multi-layer non-bonded flexible pipe under hydrate plug in a static application”

Creator:: Owolabi, Gbenga, Ayodele
Date:: 2021
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

21. Investigation of a micromechanical methodology for assessing the influence of processing variables and fibre sizing on composite interphase

Creator:: Bryce, David
Date:: 2021
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

22. Benchmarking, development and applications of an open source DSMC solver

Creator:: White, Craig
Date:: 2013
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

23. Advanced control, identification and optimisation of energy systems

Creator:: Zaher, Obadah S.
Date:: 2013
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

24. The environmental resistance of glass fibre vinyl ester composites and their interface for use in structural applications

Creator:: Xypolias, Georgios
Date:: 2022
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

25. Robust close-proximity trajectory design around small solar system bodies : application to the Hera mission.

Creator:: Fodde, Iosto
Date:: 2024
Funder:: Strathclyde Student Excellence Award (SEA) Studentship and Europeans Space Agency : Open Space Innovation Platform
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Aerospace Centre of Excellence

26. Erosion issues in tidal turbine blades

Creator:: Hassan, Emadelddin
Date:: 2023
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

27. An experimental and theoretical study of an omnidirectional pendulum energy harvester

Creator:: Sommermann, Philipp
Date:: 2023
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

28. An open-source hybrid CFD-DSMC solver for high-speed flows

Creator:: Espinoza, Daniel
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

29. Trajectory generation and tracking for drone racing

Creator:: Jamieson, Jonathan
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Advanced Space Concepts Laboratory

30. Advanced laser applications in space safety

Creator:: Walker, Lewis
Date:: 2024
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

31. Investigation of slurry erosion behaviour of rubbers and rubber composites

Creator:: Chailad, Wichain
Date:: 2022
Funder:: Royal Thai Government
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

32. Optimal state estimation and control of space systems under severe uncertainty

Creator:: Greco, Cristian
Date:: 2021
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Aerospace Centre of Excellence

33. The influence of station keeping systems on tidal turbine structural performance when operating in combined-wave current sea states

Creator:: Fu, Song
Date:: 2021
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

34. Non-keplerian orbits using hybrid solar sail propulsion for earth applications

Creator:: Heiligers, Jeannette
Date:: 2012
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

35. Methodologies for scalable and responsive swarms and networked systems

Creator:: Clark, Ruaridh
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

36. Unified approach to jet installation noise using mathematical modelling and spectral analysis of jet turbulence

Creator:: Stirrat, Sarah A.
Date:: 2024
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

37. Probabilistic structural integrity assessment based on direct methods

Creator:: Wang, Xiaoxiao
Date:: 2023
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

38. Preliminary design of reusable future space access vehicles

Creator:: Toso, Federico
Date:: 2023
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

39. Wave transformation over obstacles and its influence on a tidal turbine

Creator:: Camacho, Jose Manuel Rivera
Date:: 2022
Department, School or Faculty:: Energy Systems Research Unit and Department of Mechanical and Aerospace Engineering

40. Computational investigation of immersion quenching : understanding of boiling conjugate heat transfer

Creator:: Kamenický, Robin
Date:: 2022 and 2021
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

41. Modelling launch vehicle emissions in an evolving space sector

Creator:: Garner, Robert J.
Date:: 2022
Funder:: US-UK Fulbright Commission
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

42. Developing a microfluidic blood preparation device for ATR-FTIR spectroscopy

Creator:: Radhakrishnan, Pretheepan
Date:: 2021
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering, Department of Mathematics and Statistics, and Department of Biomedical Engineering

43. Routing and scheduling optimisation under uncertainty for engineering applications

Creator:: Polnik, Mateusz Damian
Date:: 2020
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

44. The joining development, metallurgical study and characterisation approach of brazed joints between tungsten and fusion related materials for divertor applications

Creator:: Zhang, Yuxuan
Date:: 2021
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

45. A constitutively consistent lower bound, direct shakedown and ratchet method

Creator:: Jappy, Alan
Date:: 2014
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

46. Web crippling behaviour of cold-formed steel member with web openings

Creator:: Uzzaman, Asraf
Date:: 2012
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

47. Multi-objective hybrid optimal control with application to space systems

Creator:: Ricciardi, Lorenzo Angelo
Date:: 2019
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Aerospace Centre of Excellence

48. Crack growth modelling from stress concentrations under cyclic loading histories

Creator:: Beesley, Ross
Date:: 2017
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

49. Utilising GIS mapping to identify areas of opportunity for photovoltaic power station deployment in an urban environment

Creator:: McGhee, Raheal
Date:: 2020
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

50. Viscoelastic thermally-driven flows in microgravity

Creator:: Boaro, Alessio
Date:: 2022
Department, School or Faculty:: James Weir Fluids Laboratory and Department of Mechanical and Aerospace Engineering

51. Bifurcations, multiple solutions and strange attractors in thermal convection

Creator:: Ferialdi, Hermes
Date:: 2020
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

52. PCM based thermal storage system/plant models for building energy system analysis

Creator:: Agbanigo, Olubunmi
Date:: 2021
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

53. Developing a methodology for appraising building integrated low or zero carbon technologies

Creator:: Waseem, Yaseen
Date:: 2012
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

54. Rheological characterisation and numerical flow simulation of the human eye vitreous humour fluid

Creator:: Silva, Andreia F.
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and James Weir Fluids Laboratory

55. The development of a satellite-enabled tool for offshore wind resource optimisation

Creator:: Rabaneda, Alberto S.
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

56. Newtonian and viscoelastic fluid flows in extensional microfluidic devices with multiple fluid streams

Creator:: Houston, Gemma Catherine
Date:: 2023
Funder:: Engineering and Physical Sciences Research Council, University of Strathclyde, and Ronald Miller foundation
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

57. Investigation of key challenges facing aerogel composites development through multiscale approach

Creator:: Kucharek, Mariusz
Date:: 2022
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

58. Development of fibre and particulate filled aerogel composites for subsea pipeline applications

Creator:: Webley, Andrew
Date:: 2020 and 2021
Funder:: Blueshift International Materials and Energy Technology Partnership (ETP)
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

59. Methodology to investigate the energy and indoor environmental performance of typical Egyptian offices

Creator:: Elharidi, Aly M.
Date:: 2017
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Energy Systems Research Unit

60. Reconfiguring smart structures using approximate heteroclinic connections

Creator:: Zhang, Jiaying
Date:: 2017
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

61. Investigation of novel Mg-Li-Y alloys for bioresorbable vascular scaffolds

Creator:: MacLeod, Kenneth John
Date:: 2023
Funder:: MedAlliance
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

62. Raindrop erosion of wind turbine blades in various environments

Creator:: Pugh, Kieran J.
Date:: 2023
Funder:: The SPIRE2 project
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

63. Metallurgical and mechanical property assessment of advanced grid stiffened structures produced by a modified rolling process

Creator:: Garrick, Andrew J. H.
Date:: 2023
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

64. Theoretical and experimental investigations on critical multiphase flows in safety relief valves and nozzles

Creator:: Alshaikh, Moftah Salem Moftah
Date:: 2016
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

65. The influence of microstructural condition and applied load on the tribological response of ferrous alloys in sliding

Creator:: Woodward, Ronnie
Date:: 2022
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

66. Compressive mechanical behaviour of nitinol wires used in aortic stent grafts

Creator:: Alves, Ana Sofia de Freitas
Date:: 2022 and 2021
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

67. Mechanical failure assessment of Lithium ion battery electrode under electrochemical-mechanical condition

Creator:: Zhu, Xuanchen
Date:: 2022 and 2021
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

68. Swimming behaviour of a flagellated alga in Newtonian and complex fluids

Creator:: Rycroft, Ewan
Date:: 2022
Department, School or Faculty:: James Weir Fluids Laboratory and Department of Mechanical and Aerospace Engineering

69. The influence of matrix stoichiometry on interfacial adhesion in composites for wind turbine applications

Creator:: Minty, Ross Forbes
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

70. Erosion-corrosion mapping of carbon steel in oil/water slurries

Creator:: Abdulrahman, Ghaith H.
Date:: 2011
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

71. Characterisation and modification of residual stress in brazed dissimilar material joints for a future fusion divertor

Creator:: Easton, David
Date:: 2017
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

72. Additively manufactured polymers and polymer composites for minerals processing technology

Creator:: Espinoza, Ashlee
Date:: 2023
Funder:: The Weir Group
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

73. Particle-wall interactions in turbulence flow to predict erosion in pipelines and devices

Creator:: Galanos, Nikolaos
Date:: 2022
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

74. Extended Breelike diagrams for high temperature structures

Creator:: Ma, Zhiyuan
Date:: 2022
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

75. Novel development of eco-friendly porous thermal insulation materials and the application

Creator:: Wang, Kaibao
Date:: 2022 and 2021
Funder:: Tobermory Fishing Company and University of Strathclyde
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

76. A numerical and analytical study of size effects in free vibration of heterogeneous materials

Creator:: Hassanati, Bahman
Date:: 2019
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

77. A methodology for the experimental characterisation and computational modelling of Nitinol wires used in stent-graft devices

Creator:: Boukis, Alexandros
Date:: 2020 and 2022
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

78. Recycling, regenerating and reusing reinforcement glass fibres

Creator:: Pender, Kyle Robert
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

79. Space mission applications of high area-to-mass-ratio orbital dynamics

Creator:: Bewick, Charlotte
Date:: 2013
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Advanced Space Concepts Laboratory

80. A blade design methodology for overspeed power regulation of horizontal axis tidal turbines

Creator:: Gracie-Orr, Katie
Date:: 2017
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Energy Systems Research Unit

81. An unsteady hydrodynamic model for tidal current turbines

Creator:: McCombes, Tom Ruaridh
Date:: 2014
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

82. Uncertainty quantification and state estimation for complex nonlinear problems in space flight mechanics

Creator:: Vetrisano, Massimo
Date:: 2017
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

83. Multi-disciplinary modelling of future space-access vehicles

Creator:: Wuilbercq, Romain
Date:: 2015
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Centre for Future Air-Space Transportation Technology

84. The effect of unsteady sea conditions on tidal stream turbine loads and durability

Creator:: Nevalainen, Thomas Mikael
Date:: 2016
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Energy Systems Research Unit

85. Shielding gas parameter optimisation in arc welding processes

Creator:: Campbell, Stuart William
Date:: 2015
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

86. Data-driven methodologies for bearing vibration analysis and vibration based fault diagnosis

Creator:: Al-Bugharbee, Hussein Razzaq
Date:: 2016
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

87. Atmospheric re-entry analysis of space objects

Creator:: Falchi, Alessandro
Date:: 2020
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Aerospace Centre of Excellence

88. The role of materials engineering to mitigate corrosive wear in oil field pumping applications

Creator:: Brownlie, Frazer Craig
Date:: 2017
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

89. Computational study of gas transport in shale at pore-scale and beyond

Creator:: Germanou, Lefki
Date:: 2019
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

90. Multi-fidelity global low-thrust trajectory optimisation

Creator:: Di Carlo, Marilena
Date:: 2018
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Advanced Space Concepts Laboratory

91. Analytical motion planning on 3D-Lie groups

Creator:: Maclean, Craig David
Date:: 2014
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

92. Micro-trigeneration for energy-efficient residential buildings in southern Europe

Creator:: Borg, Simon Paul
Date:: 2012
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

93. An advanced lower and upper bound shakedown analysis method to enhance the R5 high temperature assessment procedure

Creator:: Ure, James Michael
Date:: 2013
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

94. On the evaluation of cyclic behaviour for a mechanical structure under variable mechanical and thermal loads

Creator:: Chen, Weihang
Date:: 2012
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

95. Verifiable swarm engineering with limited communication

Creator:: Punzo, Giuliano
Date:: 2013
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

96. Finite element analysis and structural optimisation of a concrete mixer

Creator:: Macdonald, Peter
Date:: 2017
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

97. Air source heat pump modelling for dynamic building simulation tools based on standard test data

Creator:: Baster, Eric
Date:: 2017
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Energy Systems Research Unit

98. Numerical model of the flow phenomena preceding surge in the centrifugal blower and assessment of its applicability in designing anti-surge devices

Creator:: Liśkiewicz, Grzegorz
Date:: 2014
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering and Institute of Turbomachinery

99. Improving the design of hybrid systems using detailed simulation

Creator:: Lira, Lucas
Date:: 2013
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

100. Optimised wire arc additive manufacturing of steel components for subsea use

Creator:: Kapur, Ravi
Date:: 2022
Department, School or Faculty:: Department of Mechanical and Aerospace Engineering

Search Constraints

Search Results

1. Plasticity-induced compressive residual stress effects in fatigue and corrosion fatigue

2. An experimental and numerical investigation of refill friction stir spot welding of aerospace aluminium alloys

3. High cycle fatigue and crack arrest analysis of components with compressive residual stress

4. Performance investigation and enhancement of a novel oscillating foil based building integrated wind energy harvesting system

5. Fluid dynamic behaviour of dilute dunaliella salina suspensions in contraction-expansion microfluidic devices : potential implications for tubular phototbioreactors

6. Micro gas flows : modelling the dynamics of Knudsen layers

7. Rarefied gas flows in microscale geometries : a hybrid simulation method

8. Data-based vibration structural health monitoring methodology for composite laminated structures

9. Water flow at the nanoscale : a computational molecular and fluid dynamcis investigation

10. Mechanical analysis and simulation of the nitinol ring-stent : assessing the radial strength, fatigue safety and compaction strains

11. Building 'in' tenant energy performance : a new method of benchmarking variations in patterns of use by building tenure

12. Advanced surface engineering : evaluation of SprayStir

13. Design optimisation of complex space systems under epistemic uncertainty

14. Investigation of novel methods for manufacturing polyimide aerogel stock shape

15. Aerodynamic optimisation of wind farms using turbulence modelling

16. Additive layers to suppress delamination in composite laminates

17. Investigation of the thermoelastic effect on the satellite panels identified by an industrial problem of de-pointing

18. Nonlinear feedback controller design methods for actuator and sensor performance limited systems

19. Text mining and natural language processing for the early stages of space mission design

20. Critical review of subsea structures in the Gulf of Guinea : “Finite element analysis to predict the behaviour of a multi-layer non-bonded flexible pipe under hydrate plug in a static application”

21. Investigation of a micromechanical methodology for assessing the influence of processing variables and fibre sizing on composite interphase

22. Benchmarking, development and applications of an open source DSMC solver

23. Advanced control, identification and optimisation of energy systems

24. The environmental resistance of glass fibre vinyl ester composites and their interface for use in structural applications

25. Robust close-proximity trajectory design around small solar system bodies : application to the Hera mission.

26. Erosion issues in tidal turbine blades

27. An experimental and theoretical study of an omnidirectional pendulum energy harvester

28. An open-source hybrid CFD-DSMC solver for high-speed flows

29. Trajectory generation and tracking for drone racing

30. Advanced laser applications in space safety

31. Investigation of slurry erosion behaviour of rubbers and rubber composites

32. Optimal state estimation and control of space systems under severe uncertainty

33. The influence of station keeping systems on tidal turbine structural performance when operating in combined-wave current sea states

34. Non-keplerian orbits using hybrid solar sail propulsion for earth applications

35. Methodologies for scalable and responsive swarms and networked systems

36. Unified approach to jet installation noise using mathematical modelling and spectral analysis of jet turbulence

37. Probabilistic structural integrity assessment based on direct methods

38. Preliminary design of reusable future space access vehicles

39. Wave transformation over obstacles and its influence on a tidal turbine

40. Computational investigation of immersion quenching : understanding of boiling conjugate heat transfer

41. Modelling launch vehicle emissions in an evolving space sector

42. Developing a microfluidic blood preparation device for ATR-FTIR spectroscopy

43. Routing and scheduling optimisation under uncertainty for engineering applications

44. The joining development, metallurgical study and characterisation approach of brazed joints between tungsten and fusion related materials for divertor applications

45. A constitutively consistent lower bound, direct shakedown and ratchet method

46. Web crippling behaviour of cold-formed steel member with web openings

47. Multi-objective hybrid optimal control with application to space systems

48. Crack growth modelling from stress concentrations under cyclic loading histories

49. Utilising GIS mapping to identify areas of opportunity for photovoltaic power station deployment in an urban environment

50. Viscoelastic thermally-driven flows in microgravity

51. Bifurcations, multiple solutions and strange attractors in thermal convection

52. PCM based thermal storage system/plant models for building energy system analysis

53. Developing a methodology for appraising building integrated low or zero carbon technologies

54. Rheological characterisation and numerical flow simulation of the human eye vitreous humour fluid

55. The development of a satellite-enabled tool for offshore wind resource optimisation

56. Newtonian and viscoelastic fluid flows in extensional microfluidic devices with multiple fluid streams

57. Investigation of key challenges facing aerogel composites development through multiscale approach

58. Development of fibre and particulate filled aerogel composites for subsea pipeline applications

59. Methodology to investigate the energy and indoor environmental performance of typical Egyptian offices

60. Reconfiguring smart structures using approximate heteroclinic connections

61. Investigation of novel Mg-Li-Y alloys for bioresorbable vascular scaffolds

62. Raindrop erosion of wind turbine blades in various environments

63. Metallurgical and mechanical property assessment of advanced grid stiffened structures produced by a modified rolling process

64. Theoretical and experimental investigations on critical multiphase flows in safety relief valves and nozzles

65. The influence of microstructural condition and applied load on the tribological response of ferrous alloys in sliding

66. Compressive mechanical behaviour of nitinol wires used in aortic stent grafts

67. Mechanical failure assessment of Lithium ion battery electrode under electrochemical-mechanical condition

68. Swimming behaviour of a flagellated alga in Newtonian and complex fluids

69. The influence of matrix stoichiometry on interfacial adhesion in composites for wind turbine applications

70. Erosion-corrosion mapping of carbon steel in oil/water slurries

71. Characterisation and modification of residual stress in brazed dissimilar material joints for a future fusion divertor

72. Additively manufactured polymers and polymer composites for minerals processing technology

73. Particle-wall interactions in turbulence flow to predict erosion in pipelines and devices

74. Extended Breelike diagrams for high temperature structures

75. Novel development of eco-friendly porous thermal insulation materials and the application

76. A numerical and analytical study of size effects in free vibration of heterogeneous materials

77. A methodology for the experimental characterisation and computational modelling of Nitinol wires used in stent-graft devices

78. Recycling, regenerating and reusing reinforcement glass fibres