Search Constraints
« Previous |
1 - 100 of 133
|
Next »
Search Results
Select an image to start the slideshow
Numerical Optimisation of low alloy steel friction stir welding
1 of 100
A study of the residual stresses in dissimilar material brazed joints
2 of 100
Fluid dynamic behaviour of dilute dunaliella salina suspensions in contraction-expansion microfluidic devices, potential implications for tubular phototbioreactors
3 of 100
Investigation of the mechanical performance of natural fibres and their composites
4 of 100
Mechanical analysis and simulation of the nitinol ring-stent, assessing the radial strength, fatigue safety and compaction strains
5 of 100
Computational fluid dynamics study of erosion processes
6 of 100
A study of the metallurgical and mechanical property variability in a dual phase low alloy material
7 of 100
The role of materials engineering to mitigate corrosive wear in oil field pumping applications
8 of 100
Establishing the optimal conditions for rotating arm erosion testing, materials characterisation and computational modelling of wind turbine blade rain erosion
9 of 100
One-dimensional positive displacement pump description in cavitating conditions
10 of 100
Thermocapillary motion of droplets in complex fluid flows
11 of 100
Microfluidics for assessing the behaviour of deformable biological objects
12 of 100
Computational study of gas transport in shale at pore-scale and beyond
13 of 100
Modelling and analysis of energy demand variation and uncertainty in small-scale domestic energy systems
14 of 100
Methodologies for the analysis of value from delay-tolerant inter-satellite networking
15 of 100
Development and validation of a fatigue-resistant cladding technology
16 of 100
Optimisation of GMAW via the alternating shielding gas technique
17 of 100
Plasticity-induced compressive residual stress effects in fatigue and corrosion fatigue
18 of 100
A numerical and analytical study of size effects in free vibration of heterogeneous materials
19 of 100
The influence of station keeping systems on tidal turbine structural performance when operating in combined-wave current sea states
20 of 100
The influence of matrix stoichiometry on interfacial adhesion in composites for wind turbine applications
21 of 100
An open-source hybrid CFD-DSMC solver for high-speed flows
22 of 100
Attitude dynamics and shape control of reflectivity modulated gossamer spacecraft
23 of 100
Non-keplerian orbits using hybrid solar sail propulsion for earth applications
24 of 100
Benchmarking, development and applications of an open source DSMC solver
25 of 100
A constitutively consistent lower bound, direct shakedown and ratchet method
26 of 100
Web crippling behaviour of cold-formed steel member with web openings
27 of 100
Recycling, regenerating and reusing reinforcement glass fibres
28 of 100
Crack growth modelling from stress concentrations under cyclic loading histories
29 of 100
Space mission applications of high area-to-mass-ratio orbital dynamics
30 of 100
Droplet behaviour in microfluidic devices
31 of 100
A blade design methodology for overspeed power regulation of horizontal axis tidal turbines
32 of 100
An unsteady hydrodynamic model for tidal current turbines
33 of 100
Trajectory generation and tracking for drone racing
34 of 100
Rheological characterisation and numerical flow simulation of the human eye vitreous humour fluid
35 of 100
Methodology to investigate the energy and indoor environmental performance of typical Egyptian offices
36 of 100
Water flow at the nanoscale, a computational molecular and fluid dynamcis investigation
37 of 100
Erosion-corrosion mapping of carbon steel in oil/water slurries
38 of 100
Numerical model of the flow phenomena preceding surge in the centrifugal blower and assessment of its applicability in designing anti-surge devices
39 of 100
Reconfiguring smart structures using approximate heteroclinic connections
40 of 100
The development of a satellite-enabled tool for offshore wind resource optimisation
41 of 100
Advanced control, identification and optimisation of energy systems
42 of 100
Characterisation and modification of residual stress in brazed dissimilar material joints for a future fusion divertor
43 of 100
Fatigue design criteria for austenitic stainless steels based on simplified elastic-plastic analysis
44 of 100
Methodologies for scalable and responsive swarms and networked systems
45 of 100
Uncertainty quantification and state estimation for complex nonlinear problems in space flight mechanics
46 of 100
The effect of unsteady sea conditions on tidal stream turbine loads and durability
47 of 100
Multi-disciplinary modelling of future space-access vehicles
48 of 100
Shielding gas parameter optimisation in arc welding processes
49 of 100
Data-driven methodologies for bearing vibration analysis and vibration based fault diagnosis
50 of 100
Multi-fidelity global low-thrust trajectory optimisation
51 of 100
Analytical motion planning on 3D-Lie groups
52 of 100
Micro-trigeneration for energy-efficient residential buildings in southern Europe
53 of 100
An advanced lower and upper bound shakedown analysis method to enhance the R5 high temperature assessment procedure
54 of 100
On the evaluation of cyclic behaviour for a mechanical structure under variable mechanical and thermal loads
55 of 100
Verifiable swarm engineering with limited communication
56 of 100
Air source heat pump modelling for dynamic building simulation tools based on standard test data
57 of 100
Characterization of superelastic nitinol wire for application to aortic stent graft design
58 of 100
An open-source CFD solver for planetary entry
59 of 100
Lattice Boltzmann modelling of droplet dynamics in confinement
60 of 100
Dynamic coupling of air culvert air conditioning hybrid cooling system in buildings
61 of 100
Polynomial motion planning in spacecraft attitude and docking to tumbling debris
62 of 100
Detailed simulation of the indoor environment to aid ventilation system design in low energy houses
63 of 100
Building 'in' tenant energy performance, a new method of benchmarking variations in patterns of use by building tenure
64 of 100
Active control of femtosatellite swarms for synthetic aperture rada
65 of 100
The effect of acidity and salinity level in erosion-corrosion performance of metals
66 of 100
A computational and experimental investigation into the performance of industrial refrigeration helical oil separators
67 of 100
Shock estimation in supersonic vehicles
68 of 100
Pore-scale dynamics of immiscible two-phase flow on porous and fractured media
69 of 100
Investigation of smooth contact angle treatment in porous media
70 of 100
Numerical modelling of rubber hyperelasticity, parameter identification and finite element implementations
71 of 100
Multi-objective inversion-based control of building integrated energy systems
72 of 100
In the wake of a tidal turbine
73 of 100
A numerical & experimental investigation into size effects within loaded additively manufactured cellular solids
74 of 100
Characterisation of metallurgical and mechanical properties of friction stir welded low alloy steels for marine applications
75 of 100
An evaluation of noise reduction algorithms for particle-based fluid simulations in multi-scale applications
76 of 100
Development of an experimental methodology for appraising the dynamic response of tethered tidal turbines
77 of 100
Building integrated low impact ICT networks
78 of 100
Toward automated design of Combined Cycle Propulsion
79 of 100
On the dynamics, stability and control of displaced lunar orbits
80 of 100
Natural and perturbed dynamics about Trojan bodies
81 of 100
Investigation of erosion-corrosion behaviour of pump materials
82 of 100
Intelligent design of microfluidic components for Newtonian and complex fluid systems
83 of 100
The effect of size and void configuration on the stress intensity factor of regular and stochastic porous materials
84 of 100
On the evaluation of high temperature creep-fatigue responses of structures
85 of 100
High dimensional uncertainty propagation for hypersonic flows and entry propagation
86 of 100
Multi-dimensional thermal response & permeability characterization for porous ablative materials
87 of 100
Natural and artificial orbits around the Martian moon Phobos
88 of 100
Design by analysis of a fixed tube sheet heat exchanger subject to in-phase proportional loading
89 of 100
Impacts and mitigation of latest climate change legislation on participant organisations
90 of 100
Exploiting astrodynamics for the manipulation and exploration of asteroids
91 of 100
Development and validation of a novel hybrid CFD slurry model
92 of 100
The effect of nanofibers for improving the dynamic and mechanical properties of composite laminates and their application as self-powered sensors
93 of 100
Investigation of the strength loss of heat treated glass fibre
94 of 100
Study on structural integrity of welded components using the LMM
95 of 100
Towards an improved representation of building occupant's thermal interaction, integrating detailed occupant thermal models within building simulation
96 of 100
Advanced surface engineering, evaluation of SprayStir
97 of 100
A chemical approach to regenerating the performance of thermally damaged glass fibres
98 of 100
Advances in an open-source direct simulation Monte Carlo technique for hypersonic rarefied gas flows
99 of 100
Atmospheric reentry modelling using an open-source DSMC code
100 of 100