Thesis
Investigation into maximizing component availability for superconducting cables in turbo-electric distributed propulsion aircraft
- Creator
- Rights statement
- Awarding institution
- University of Strathclyde
- Date of award
- 2023
- Thesis identifier
- T16722
- Person Identifier (Local)
- 201553519
- Qualification Level
- Qualification Name
- Department, School or Faculty
- Abstract
- The commercial aviation industry is growing at a substantial rate, with demand doubling every 15 years and this trend is set to continue well into the 21st Century. At the same time regulatory pressures are being exerted on the industry as governments around the world seek to reduce their greenhouse gas emissions in an effort to contain global temperature rise to 2°C . Combined with existing infrastructure challenges, these issues are forcing air-framers to develop new, novel designs that support sustainable approaches to future aviation to meet environmental, social and economic demands. The pathway to decarbonisation of aviation will involve a combination of fuel, technology and operational measures. Many of the proposed technologies, such as electrical propulsion, are inherently disruptive and require changes to supply-chains,ground operations, maintenance standards and procedures, and pilot training. Such disruption is unavoidable given the scale of the challenge of electrical propulsion: a typical widebody jet engine for passenger aircraft can output over 22 MW fully loaded; an equivalent electrical system must be able to generate, distribute, and produce same amount of thrust with equal or greater reliability than the existing drivetrain that has been perfected over the course of the last century. Turbo-electric Distributed Propulsion (TeDP) is an approach for the electrification of propulsion systems on aircraft that aims to do this. Instead of large turbofan engines used to generate thrust, power in the engines is converted to electricity using electrical generators, and then distributed electrically through a network to propulsion motors placed in aerodynamically advantageous locations, significant fuel savings and performance benefits may be realised. Electrification of the propulsion system comes with large weight penalties. It is critical that the weight of the electrical power system does not mitigate the benefits of electrification. Superconducting electrical machines have been proposed as a route to lightweighting the electrical power system due to their promising high power densities compared to conventional electrical machines. It is proposed that the rest of the electrical power system be superconducting as far as technically possible to minimise heat sinks within the system. Integration of superconducting materials into the most safety critical aspects of commercial aviation raises multiple research questions regarding the design of resilient systems and how appropriate electrical protection strategies can be designed given the strict electric, magnetic, and thermal operating requirements that these components have. All electrical systems experience faults. This Thesis investigates how these faults manifest within a compact, power-electronically interfaced, superconducting network. The research presented in this thesis captures electrical protection requirements through modelling, simulation, and experimentation to develop requirements for TeDP feeder cables. By building on these requirements this thesis will then show how cable design can be optimised to withstand faults and present a control method which enables maximising throughput of cables during temperature rise events. This knowledge aims to improve availability, in terms of reducing the amount of superconducting network de-rating required, and power provision of superconducting feeder cables during adverse conditions encountered by superconducting TeDP aircraft.
- Advisor / supervisor
- Jones, Catherine
- Norman, Patrick
- Resource Type
- DOI
- Date Created
- 2023
Relazioni
Articoli
| Thumbnail | Titolo | Data caricata | Visibilità | Azioni |
|---|---|---|---|---|
|
|
PDF of thesis T16722 | 2023-10-18 | Pubblico | Scaricare |