Thesis
Software-in-the-loop applications for improved physical model tests of ocean renewable energy devices using artificial intelligence
- Creator
- Rights statement
- Awarding institution
- University of Strathclyde
- Date of award
- 2020
- Thesis identifier
- T15530
- Person Identifier (Local)
- 201656293
- Qualification Level
- Qualification Name
- Department, School or Faculty
- Abstract
- Experimental research in laboratory is a necessary and useful method to explore the full potential of a device. Because it does not only require much less money than the prototype at sea test, it also provides more reliable results compared to numerical simulations. Hence, it is significantly vital to make accurate model tests of the concerned ocean renewable energy (ORE) devices possible. For this reason, this study for a PhD degree has been finished and a thesis, therefore, is produced. There is a need for a method to provide linear or nonlinear real-time power-take-off forces to the wave energy converting mechanism in the water during the experiment. More urgently, it is essential to overcome the discrepancy caused by following Froude-scaling law and Reynold-scaling law in the test of a model-scaled FOWT. Two applications for WECs and FOWTs are proposed separately, to meet the challenges.;Following the conceptual design of the software-in-the-loop (SIL) application for a WEC, an innovative generic platform, which can explicitly provide a real-time PTO damping force in terms of either linear or non-linear (at different scales) is developed and characterised by 1349 drop tests. Subsequent physical model tests of a OWSC WEC device are carried out. The power efficiency of the OWSC WEC device under different PTO strategies is then estimated based on the analysis of experimental results. The best linear damping in regular waves is driven by gaining 80 in the control function, while 160 for nonlinear PTO damping. Furthermore, it is revealed that nonlinear PTOs have no distinct advantage in the amount of electricity output, but can lead to better stability and broader damping range. Following the conceptual design of an AI-based hybrid testing application for a FOWT system, a prediction module of the rotor thrust is needed to be estimated and optimised in the first place. For this reason, a considerable amount of simulations under various conditions are carried out by fully-coupled computation software, and the results obtained are used to train an artificial intelligence structure. Then a prediction module which depends on five inputs, and gives one output rotor thrust, is estimated mathematically. The mathematical module is converted to the control function in the program in a controller to execute it in real-time tests. Therefore, the AI machine is sometimes referred to as the SIL application for FOWTs, which consists of a prediction module obtained by AI training, a controller, and the program in the controller. The AI machine is the key component to implement the AI-based real-time hybrid model (AIReaTHM) testing methodology.;As one of the highlights in the present study, the AIReaTHM testing rig is developed, and bench tests are carried out with a manoeuvrable motion simulator. The comprehensive testing results are analysed for three purposes: 1, validating the AIReaTHM testing methodology. 2, assessing the influences of wind speed, wind turbulence intensity, wave spectrum, input hydrodynamic motions on rotor thrust are reflected by the SIL application.3, evaluating the systematic uncertainty in the testing rig, which is to be compensated by further improving the testing system. The effect of the surge frequency, wave spectrum and wind models have on the targeted thrust is discussed. The time delay in the testing system is identified as within 0.1s, and the overall uncertainty from the testing rig is 5-15KN (the minimum rotor thrust is 508KN, hence the uncertainty is 0.98%-2.95% in percentage) when compared to the AI prediction.;The testing rig developed is further applied to a 1:73 model of a Hywind floating wind turbine. 4 testing campaigns are carried out, and 303 independent tests are conducted. Testing results with the real-time rotor thrust provided by the AI-based software-in-the-loop application are compared with the other three comparative testing patterns. They are tests with a constant rotor thrust, without any rotor thrust, with AI predicted rotor thrust but without wave inputs, and in only wave conditions respectively. The performance of the rotor thrust obtained by the AI prediction agrees well with the benchmark testing results. Then, the hydrodynamic responses of the model are compared among those four testing patterns, for both regular wave tests and irregular wave tests in terms of time histories, RAOs, statistical analysis, and spectral analysis. The RAOs of the model under three testing patterns are given for regular wave tests. The hydrodynamic response revealed that the AIReaTHM is better than applying a constant rotor thrust atop of the model, though further improvement is required to meet realistic response. In the final chapter, conclusions are drawn and original contribution of this PhD study is outlined. Besides, a few points concerning future work are addressed.
- Advisor / supervisor
- Tao, Longbin
- Resource Type
- DOI
- Date Created
- 2020
- Former identifier
- 9912912693102996
Relações
Itens
Miniatura | Título | Data de carga | Acesso | Ações |
---|---|---|---|---|
|
PDF of thesis T15530 | 2021-07-02 | Público | Baixar |