Contents

% Showing the results (positon of the interface) of example 1
% TO 091224

load name            % get basename of this model
load(basename);      % load data for this model (generaged in mf_adapt

[xGr,yGr,zGr,xm]=modelsize3(xGr,yGr,zGr); % get xm

[NROW,NCOL,NLAY]=size(IBOUND);  % get size of model

H  =readDat([basename,'.HDS']);  % use only H.totim
ZTA=readBud([basename,'.ZTA']);  % get interface positions

NT   =length(ZTA);      % total number of time steps in ZTA file
NSURF=length(ZTA(1).label);

[MFnams,MFvals]=getExcelData([basename,'.xls'],'MFLOW','Vertical');
ISTRAT=MFvals(index('ISTRAT',MFnams),1);

Reading dat file swiex2.HDS, which contains the following information:
Number of stress periods:          1
Number of time steps    :       1000
Number of layers        :          1
Number of rows          :          1
Number of columns       :         60
iRec=  1 iR=  1 iPer=  1, iStp250, pertim=         500, totim=         500 Layers=  11
iRec=  2 iR=  2 iPer=  1, iStp500, pertim=        1000, totim=        1000 Layers=  11
iRec=  3 iR=  3 iPer=  1, iStp750, pertim=        1500, totim=        1500 Layers=  11
iRec=  4 iR=  4 iPer=  1, iStp1000, pertim=        2000, totim=        2000 Layers=  11
Trying to read swiex2.ZTA as BINARY      file...worked!
Reading budget file swiex2.ZTA, which contains the following information:
The following 2 budget term labels were in the file:
ZETAPLANE1
ZETAPLANE2
Stress periods     :   1
Time steps         :  250 500 750 1000
Number of layers   :          1
Number of rows     :          1
Number of columns  :         60
Label(iPer=  1,iTstp=250) =ZETAPLANE1
Label(iPer=  1,iTstp=250) =ZETAPLANE2
Label(iPer=  1,iTstp=500) =ZETAPLANE1
Label(iPer=  1,iTstp=500) =ZETAPLANE2
Label(iPer=  1,iTstp=750) =ZETAPLANE1
Label(iPer=  1,iTstp=750) =ZETAPLANE2
Label(iPer=  1,iTstp=1000) =ZETAPLANE1
Label(iPer=  1,iTstp=1000) =ZETAPLANE2

Figure of rotating interface

% setup figure
figure; hold on
xlabel('x [m]'); ylabel('z [m]'); grid on;
title(sprintf('basename, rotation of brackish zone, ISTRAT=%d',ISTRAT));
set(gca,'xlim',xGr([1 end]),'ylim',sort(zGr([1 end])));

% plot all interface positions
leg{NT}=' '; % allocate leg cell array

clr='brgkcmy'; clr=repmat(clr,1,ceil(NT/length(clr))); % enough colors
stl='-:;.';    stl=repmat(stl,1,ceil(NSURF/length(stl))); % enough styles

k=1;
% use the stored interface in ZETA in mf_adapt to plot initial positions
for iSurf=1:length(ZTA(1).label)
    plot(ZETA(iSurf).x,ZETA(iSurf).z,['k' stl(iSurf)]);
    leg{k}=sprintf('IFACE(%d) T=0',iSurf);
    k=k+1;
end

% plot computed positions
for it=1:NT          % for all recoreds in bud file (and H-file)
    for iSurf=1:length(ZTA(1).label)
        idx=strmatch(sprintf('ZETAPLANE%d',iSurf'),ZTA(it).label);
        for iLay=1:NLAY  % we only have one layer in this case
            plot(xm,squeeze(ZTA(it).term{idx}(1,:,iLay)),[clr(it) stl(iSurf)]);
            leg{k}=sprintf('IFACE(%d) T=%.0f d',iSurf,H(it).totim);
            k=k+1;
        end
    end
end
legend(leg);
% axis equal
% axis tight

Published with MATLAB® 7.7