Search Constraints
Filtering by:
Department, School or Faculty
Bioengineering Unit.
Remove constraint Department, School or Faculty: Bioengineering Unit.
Type
Thesis
Remove constraint Type: Thesis
1 - 62 of 62
Number of results to display per page
Search Results
Select an image to start the slideshow
Development and investigation of polymeric vascular graft materials
1 of 62
Biomechanics of the forefoot
2 of 62
Biomechanical model of the shoulder joint
3 of 62
A study of patient and nurse factors influencing sub-bandage pressure
4 of 62
Thermographic studies of tissue trauma and seating
5 of 62
Size-dependent mechanical properties of single polyurethane nanofibres
6 of 62
Development of a biomechanical model of the interface between the residual limb and prosthesis for trans-femoral amputees
7 of 62
The production and control of functional electrical stimulation swing-through gait
8 of 62
Paraplegic standing and reciprocal gait using a floor reaction hybrid F.E.S. orthosis
9 of 62
Blood response to biomaterials, in vitro and clinical investigation of the contact phase of blood coagulation
10 of 62
The biomechanics of the human foot
11 of 62
The biomechanical basis of spinal manual therapy
12 of 62
The step test for biomechanical assessment of human locomotion function
13 of 62
The application of silicone gel for the treatment of hypertrophic scars and burn wounds, and consideration of the "ideal" burn dressing
14 of 62
Biomechanical study of upper limb activities of daily living
15 of 62
Biomechanics of the upper limb, applications of motion analysis and force measurement techniques
16 of 62
Carbon dioxide transfer in membrane oxygenators and associated membranes
17 of 62
A theoretical approach to the prediction of haemolysis in centrifugal blood pumps
18 of 62
Optimising drug release from coronary stents, a role for conducting polymers?
19 of 62
Plasticised poly(vinyl chloride), significance of plasticiser and surface modification for protein adsorption
20 of 62
The biomechanics of the acetabulum and acetabular replacement
21 of 62
Movements of the cervical spine observed by diagnostic ultrasound
22 of 62
MRI brain tumour classification using image processing and data mining
23 of 62
Controlled pulsatile architecture in cardiopulmonary bypass, in-vitro and clinical studies
24 of 62
A three dimensional mathematical model of the human knee
25 of 62
Design principles for controllers of externally powered knee mechanisms for trans-femoral amputees
26 of 62
The effects of prosthetic alignment on the stability of the knee in above knee amputees
27 of 62
A posture control model and balance test for the prediction of relative postural stability, with special consideration to the problem of falling in the elderly
28 of 62
Contributions of posture and deformity to the body-seat interface conditions of a person with spinal cord injuries
29 of 62
Comparison of biomechanical and proprioceptive function following resurfacing arthroplasty and standard total hip replacement
30 of 62
The influence of limb alignment on the gait of above-knee amputees
31 of 62
The influence of polypropylene ankle-foot orthoses on the gait of cerebral palsied children
32 of 62
Non-invasive monitoring of glucose and lactate in humans by reverse iontophoresis
33 of 62
Inactivation of microorganisms isolated from infected lower limb arthroplasty using High-Intensity Narrow-Spectrum (HINS) light
34 of 62
The effect of chemical fixation on the structural properties of human collateral knee ligaments
35 of 62
Gait study of dysvascular lower limb amputees in early stage of rehabilitation
36 of 62
Contribution of cortico muscular synchrony to human movement and its potential use in neuroprosthetic control
37 of 62
Validation of a navigated hip replacement surgery system
38 of 62
A pilot study comparing the performance of the microprocessor-controlled RHEO knee and the 3R80 hydraulic knee
39 of 62
The tribological significance of the joint fluid analog in a hip joint simulator
40 of 62
Ankle joint biomechanics
41 of 62
Comparison of the primary stability and seating force of two uncemented cup designs used for total hip replacement
42 of 62
Hip joint forces, hip joint forces of 40 to 60 year old normal and total hip replacement subjects during walking and stair, ramp and camber negociation
43 of 62
Evaluation of a flexible goniometer with a view to developing a hip dislocation articulation alert system
44 of 62
Elbow joint prosthesis design, biomechanical aspects
45 of 62
Biomechanics of the ankle joint complex using a muscle model assisted optimisation model
46 of 62
Towards a tri-leaflet polyurethane heart valve prothesis
47 of 62
Assessment of movement in the elderly during sleep with reference to pressure sore prevention
48 of 62
A theoretical investigation of inversion layer transducers (ILT) for ultrasonic skin thickness measurement
49 of 62
The hip joint capsule, Mechanical properties and contribution to joint stability in total hip replacement
50 of 62
Vibration reponse analysis in orthopaedics and its application at the lumbar spine
51 of 62
The preclinical and clinical assessment of the physical characteristics of burn wound dressings
52 of 62
Characterisation and biocompatibility evaluation of calcium phosphate biomaterials in vitro
53 of 62
Hypertrophic scar tissue : its microstructure and mechanical properties and the effects of pressure therapy
54 of 62
Hypertrophic scar therapy : pressure-induced remodelling and its determinents
55 of 62
Biomechanical evaluation of prosthetic feet
56 of 62
Heat and matter transfer in body organs with special reference to skin blood flow and localised hyperthermia
57 of 62
A television/computer system for human locomotion analysis
58 of 62
The biomechanical characteristics of human skin
59 of 62
Study of the effect of alignment variations on the kinematics of amputee's gait
60 of 62
Brain computer interface using detection of movement intention
61 of 62
Development of user-friendly system of flexible electrogoniometers for use in total knee arthroplasty
62 of 62