Search Constraints
Filtering by:
Department, School or Faculty
Bioengineering Unit.
Remove constraint Department, School or Faculty: Bioengineering Unit.
1 - 63 of 63
Number of results to display per page
Search Results
Select an image to start the slideshow
Study of the effect of alignment variations on the kinematics of amputee's gait
1 of 63
The biomechanical characteristics of human skin
2 of 63
A television/computer system for human locomotion analysis
3 of 63
Heat and matter transfer in body organs with special reference to skin blood flow and localised hyperthermia
4 of 63
Biomechanical evaluation of prosthetic feet
5 of 63
Hypertrophic scar therapy : pressure-induced remodelling and its determinents
6 of 63
Hypertrophic scar tissue : its microstructure and mechanical properties and the effects of pressure therapy
7 of 63
Characterisation and biocompatibility evaluation of calcium phosphate biomaterials in vitro
8 of 63
The preclinical and clinical assessment of the physical characteristics of burn wound dressings
9 of 63
Vibration reponse analysis in orthopaedics and its application at the lumbar spine
10 of 63
The hip joint capsule, Mechanical properties and contribution to joint stability in total hip replacement
11 of 63
A theoretical investigation of inversion layer transducers (ILT) for ultrasonic skin thickness measurement
12 of 63
Assessment of movement in the elderly during sleep with reference to pressure sore prevention
13 of 63
Towards a tri-leaflet polyurethane heart valve prothesis
14 of 63
Biomechanics of the ankle joint complex using a muscle model assisted optimisation model
15 of 63
Elbow joint prosthesis design, biomechanical aspects
16 of 63
Evaluation of a flexible goniometer with a view to developing a hip dislocation articulation alert system
17 of 63
Hip joint forces, hip joint forces of 40 to 60 year old normal and total hip replacement subjects during walking and stair, ramp and camber negociation
18 of 63
Comparison of the primary stability and seating force of two uncemented cup designs used for total hip replacement
19 of 63
Ankle joint biomechanics
20 of 63
The tribological significance of the joint fluid analog in a hip joint simulator
21 of 63
A pilot study comparing the performance of the microprocessor-controlled RHEO knee and the 3R80 hydraulic knee
22 of 63
Validation of a navigated hip replacement surgery system
23 of 63
Contribution of cortico muscular synchrony to human movement and its potential use in neuroprosthetic control
24 of 63
Gait study of dysvascular lower limb amputees in early stage of rehabilitation
25 of 63
The effect of chemical fixation on the structural properties of human collateral knee ligaments
26 of 63
Inactivation of microorganisms isolated from infected lower limb arthroplasty using High-Intensity Narrow-Spectrum (HINS) light
27 of 63
Non-invasive monitoring of glucose and lactate in humans by reverse iontophoresis
28 of 63
The influence of polypropylene ankle-foot orthoses on the gait of cerebral palsied children
29 of 63
The influence of limb alignment on the gait of above-knee amputees
30 of 63
Comparison of biomechanical and proprioceptive function following resurfacing arthroplasty and standard total hip replacement
31 of 63
Contributions of posture and deformity to the body-seat interface conditions of a person with spinal cord injuries
32 of 63
A posture control model and balance test for the prediction of relative postural stability, with special consideration to the problem of falling in the elderly
33 of 63
The effects of prosthetic alignment on the stability of the knee in above knee amputees
34 of 63
Design principles for controllers of externally powered knee mechanisms for trans-femoral amputees
35 of 63
A three dimensional mathematical model of the human knee
36 of 63
Development of user-friendly system of flexible electrogoniometers for use in total knee arthroplasty
37 of 63
Controlled pulsatile architecture in cardiopulmonary bypass, in-vitro and clinical studies
38 of 63
MRI brain tumour classification using image processing and data mining
39 of 63
Movements of the cervical spine observed by diagnostic ultrasound
40 of 63
The biomechanics of the acetabulum and acetabular replacement
41 of 63
Plasticised poly(vinyl chloride), significance of plasticiser and surface modification for protein adsorption
42 of 63
Optimising drug release from coronary stents, a role for conducting polymers?
43 of 63
A theoretical approach to the prediction of haemolysis in centrifugal blood pumps
44 of 63
Carbon dioxide transfer in membrane oxygenators and associated membranes
45 of 63
Biomechanics of the upper limb, applications of motion analysis and force measurement techniques
46 of 63
Biomechanical study of upper limb activities of daily living
47 of 63
The application of silicone gel for the treatment of hypertrophic scars and burn wounds, and consideration of the "ideal" burn dressing
48 of 63
The step test for biomechanical assessment of human locomotion function
49 of 63
The biomechanical basis of spinal manual therapy
50 of 63
Hip joint forces in hip replacement patients and normal subjects during activities of daily living
51 of 63
The biomechanics of the human foot
52 of 63
Blood response to biomaterials, in vitro and clinical investigation of the contact phase of blood coagulation
53 of 63
Brain computer interface using detection of movement intention
54 of 63
Paraplegic standing and reciprocal gait using a floor reaction hybrid F.E.S. orthosis
55 of 63
The production and control of functional electrical stimulation swing-through gait
56 of 63
Development of a biomechanical model of the interface between the residual limb and prosthesis for trans-femoral amputees
57 of 63
Size-dependent mechanical properties of single polyurethane nanofibres
58 of 63
Thermographic studies of tissue trauma and seating
59 of 63
A study of patient and nurse factors influencing sub-bandage pressure
60 of 63
Biomechanical model of the shoulder joint
61 of 63
Biomechanics of the forefoot
62 of 63
Development and investigation of polymeric vascular graft materials
63 of 63