Search Constraints
Filtering by:
Department, School or Faculty
Department of Electronic and Electrical Engineering
Remove constraint Department, School or Faculty: Department of Electronic and Electrical Engineering
Resource type
http://purl.org/coar/resource_type/c_db06
Remove constraint Resource type: http://purl.org/coar/resource_type/c_db06
« Previous |
1 - 100 of 640
|
Next »
Number of results to display per page
Search Results
Select an image to start the slideshow
Deep learning for wireless communications : flexible architectures and multitask learning
1 of 100
![](/assets/work-ff055336041c3f7d310ad69109eda4a887b16ec501f35afc0a547c4adb97ee72.png)
Decarbonising heat and transport : impacts on local electricity systems
2 of 100
Demand side self-scheduling under dynamic pricing uncertainty
3 of 100
Dielectric exploration and PD detection in high voltage insulation
4 of 100
A simulation-based optimisation method to evaluate dynamic compensators for the improvement of LCC-HVDC performance in high source impedance power systems
5 of 100
An active protection scheme for fault isolation and post-fault recovery in microgrids
6 of 100
Investigation of 405-nm light as a pathogen reduction technology for human blood plasma : evaluation of antimicrobial action & protein compatibility
7 of 100
Characterising network asset uncertainty on distribution networks
8 of 100
The partial frequency energy converter : a novel device for low-frequency offshore wind electricity transmission
9 of 100
Control and operation of Solid-State Transformer (SST) in distribution network
10 of 100
Automated, scalable robotic NDT inspections of unknown free form parts
11 of 100
Unmanned aerial vehicles for contact-based inspection
12 of 100
Enhanced static voltage stability and short circuit monitoring performance and optimization of future onshore AC power systems
13 of 100
Monitoring of prestressed concrete structures in a nuclear power plant with fibre Bragg grating systems
14 of 100
Uncovering the predominant factors influencing the transient stability margin in power systems with increasing renewable generation using interpretable machine learning
15 of 100
Analysis and development of power quality metrics for railway electric networks
16 of 100
Restricted structure non-linear generalized minimum variance control
17 of 100
Maximum power point tracking and control of grid interfacing PV systems
18 of 100
The use of direct current distribution systems in delivering scalable charging infrastructure for battery electric vehicles
19 of 100
Low-rate non-intrusive load monitoring approaches via graph signal processing
20 of 100
Applications of machine learning in diagnostics and prognostics of wind turbine high speed generator failure
21 of 100
Elasticity mapping for breast cancer diagnosis using tactile imaging and auxiliary sensor fusion
22 of 100
Development of a microfluidic platform for multicellular tumour spheroid assays
23 of 100
Spatio-temporal prediction of wind fields
24 of 100
Design and implementation of an efficient solar powered irrigation management system for drip irrigated maize field
25 of 100
PID controller tuning methods for process industry applications
26 of 100
UHF monitoring of partial discharges in high voltage transformers
27 of 100
Grid integration of renewable power generation
28 of 100
Medium-voltage PWM indirect vector controlled induction motor drive with a long motor feeder
29 of 100
Risk assessment due to load demand and electricity price forecast uncertainty
30 of 100
Development of biomimetic MEMS microphones inspired by Ormia Ochracea working in audio range
31 of 100
A generic evaluation of loads in horizontal axis wind turbines
32 of 100
Development of an annular array through-transmission system for non-contact inspection applications
33 of 100
Anomaly detection and diagnostics in distribution networks using high-frequency PQ data
34 of 100
Integration of active network management into the distribution control room environment
35 of 100
The design of more-electric engine power systems
36 of 100
Considerations for in-process ultrasonic phased array inspection and monitoring of fusion welding processes
37 of 100
Resilient power and propulsion system design for eVTOL aircraft
38 of 100
Internal load modelling of tapered-roller main bearings in wind turbines
39 of 100
Model-free non-invasive health assessment for battery energy storage assets
40 of 100
On the efficient implementation of the Line Hough Transform for embedded vision systems
41 of 100
Protection challenges in future converter-dominated power systems : investigation and quantification using a novel flexible modelling and hardware testing platform
42 of 100
Black-start provision from grid-forming converters : a new network restoration paradigm
43 of 100
Coordination of quadrature booster transformers
44 of 100
Design and analysis of an LVDC offshore microgrid for improving the electrical infrastructure of the multi-use platform
45 of 100
New data analysis and dimensionality reduction methods for hyperspectral imagery
46 of 100
Recommendations for static electricity meters beyond standards requirements
47 of 100
Aspects of laser absorption spectroscopy in the mid-infrared and visible
48 of 100
Protection and fault location schemes suited to large-scale multi-vendor high voltage direct current grids
49 of 100
Nonlinear predictive restricted structure control
50 of 100
Dual operative radar for vehicle to vehicle and vehicle to infrastructure communication
51 of 100
Additive manufacturing (3D print) of air-coupled diaphragm ultrasonic transdrucers
52 of 100
Sensitivity analysis of offshore wind farm availability and operations & maintenance costs subject to uncertain input factors
53 of 100
Optimal experimental design and its applications to biochemical engineering systems
54 of 100
Assessment of novel distributed control techniques to address network constraints with demand side management
55 of 100
Design of implicit routing protocols for large scale mobile wireless sensor networks
56 of 100
Characteristics of partial discharge under high voltage AC & DC conditions
57 of 100
The impacts of energy systems and services on sustainable development in developing countries
58 of 100
Image-based 3-D reconstruction of constrained environments
59 of 100
Low-complexity low-rate residential non-intrusive appliance load monitoring
60 of 100
Multi-modality feature fusion and unsupervised hyperspectral band selection for effective classification of remote sensing images
61 of 100
2D ultrasonic phased arrays for quantitative characterisation of complex defects
62 of 100
Solid-state lasers with tunable output properties enabled by MEMS mirrors
63 of 100
Stability and control of network with high penetration of small scale embedded generation
64 of 100
The development of microfluidic assays for functional neural network communication studies & CNS drug discovery
65 of 100
Development of HTS trapped field magnet using 2G HTS coated conductors
66 of 100
Investigation and assessment of the benefits for power systems from wind farm control
67 of 100
Assessing the feasibility of a solar microgrid social enterprise in sub-Saharan Africa
68 of 100
Design and analysis of secure offshore wind farms
69 of 100
Deep learning and information fusion based classification of breast cancer in mammography images
70 of 100
Study AC loss of 2G HTS for future electric aircraft propulsion
71 of 100
Holistic and adaptive robotic welding
72 of 100
An active unit protection scheme for islanded microgrids with inverter-interfaced distributed generation
73 of 100
3D tumour-stroma microfluidic cultures for the assessment of anti-cancer therapies
74 of 100
Accommodating maintenance in prognostics
75 of 100
Mobility of charge carriers, particle charging and electro-hydrodynamic processes in dielectric liquids and nanofluids
76 of 100
Design of module level converters in photovoltaic power systems
77 of 100
A framework for developing a prognostic model using partial discharge data from electrical trees
78 of 100
Maximising the benefit of distributed wind generation through intertemporal Active Network Management
79 of 100
Assessment of complex wind turbine wake flow using scanning wind lidar measurements and numerical analysis techniques
80 of 100
Wideband data-independent beamforming for subarrays
81 of 100
Cost of energy optimisation of offshore wind turbine pmg drive trains based on uncertainty
82 of 100
Advanced signal processing tools for ballistic missile defence and space situational awareness
83 of 100
Non-intrusive load monitoring solutions for low- and very low-rate granularity
84 of 100
A wearable platform for monitoring the tissue viability of lower limb amputees
85 of 100
Modelling and control of wind turbines with aeroelastically tailoring blades
86 of 100
NILM : energy monitoring, modelling, and disaggregation
87 of 100
Smart grid solutions enable the accommodation of wide-scale electric cooking by rural electricity infrastructure
88 of 100
Stability and accuracy enhancement of power hardware-in-the-loop simulation
89 of 100
Automated quantitative inspection of nuclear assets and canisters
90 of 100
3D-printed photoacoustic spectroscopy for industrial process control
91 of 100
Reliable & selectable islanding detection techniques for low inertia power system
92 of 100
Quantitative assessment of vocal cord abduction and adduction to measure movement symmetry using flexible fibreoptic endoscopy
93 of 100
D-PorCCA, a new tool to study the acoustic life of harbour porpoises
94 of 100
Interconnection of solar home systems as a path to bottom-up electrification
95 of 100
Enhanced active power control of photovotaic systems
96 of 100
3D-printing technology applied to the development of bio-inspired functional acoustic systems
97 of 100
Cross-layer design of adaptive communications solutions in wireless sensor networks
98 of 100
Anonymous communications in wireless access networks
99 of 100
MEMS micromirrors for imaging applications
100 of 100