Search Constraints
Filtering by:
Department, School or Faculty
Department of Electronic and Electrical Engineering
Remove constraint Department, School or Faculty: Department of Electronic and Electrical Engineering
« Previous |
1 - 100 of 688
|
Next »
Number of results to display per page
Search Results
Select an image to start the slideshow
PU elastomers and grafted GO/PU nanocomposite with self-healing and self-adapting capabilities for next-generation electrical insulation
1 of 100
Performance and energy efficiency of low irradiance antimicrobial violet-blue light for environmental decontamination applications
2 of 100
Wind turbine blade leading edge erosion : an investigation of rain droplet and hailstone impact induced damage mechanisms
3 of 100
Breakdown properties of mineral oil and ester based TiO₂ and BN nanofluids
4 of 100
Wind farm high frequency electrical resonances : impedance-based stability analysis and mitigation techniques
5 of 100
Electrostatic precipitation of fine airborne particles and biological decontamination : efficiency and energy consumption tendencies
6 of 100
Analysis and practical assessment of converter-dominated power systems : stability constraints, dynamic performance and power quality
7 of 100
Coping with through life fast jet upgrades : towards a decentralised electrical system
8 of 100
Video analytics algorithms and distributed solutions for smart video surveillance
9 of 100
Directional hearing at the micro-scale : bio-inspired sound localization
10 of 100
Analysis and design of FIR multirate filter banks
11 of 100
Power plant investment appraisal : electric industry and economic growth nexus
12 of 100
The optical sensor mote : a novel device for enabling next generation Wireless Sensor Networks
13 of 100
Biologically inspired acoustic systems : from insect ears to MEMS microphone structures
14 of 100
On ultrasound elastography : simulation, experiment, and algorithm development
15 of 100
Machine analysis : being a study of the application of the finite element method for solving the two-dimensional field of the single-phase shaded-pole induction motor
16 of 100
Nonlinear control : an LPV nonlinear predictive generalised minimum variance perspective
17 of 100
Maximising wind farm connections : an investigation of novel voltage management and principles of access techniques in active distribution networks
18 of 100
Enhanced frequency control for greater decentralisation and distributed operation of power systems : design to laboratory validation
19 of 100
Wavelength modulation spectroscopy with tunable diode lasers : a calibration-free approach to the recovery of absolute gas absorption line-shapes
20 of 100
Economic aspects of intelligent network selection : a game-theoretic approach
21 of 100
Recurrent neurofuzzy system with GA-based algorithm for power systems planning and reinforcement
22 of 100
The economic losses of power quality disturbance : different perspectives of cost models
23 of 100
Grounding grid design for high voltage substations : an assessment of effectiveness for lightning currents
24 of 100
Research mini-projects : 1. Probabilistic forecasting of maximum wave height ; 2. Optimal sizing and operation of battery storage at ray wind farm
25 of 100
Antimicrobial 405 nm light for clinical decontamination : investigation of the antiviral efficacy and potential for bacterial tolerance
26 of 100
Rethinking ducted turbines : the fundamentals of aerodynamic performance and theory
27 of 100
Multi-technology offshore wind power systems : control and dynamic performance assessment
28 of 100
Model-based optimisation approaches for system energy performance improvement and evaluation
29 of 100
High-performance compact gas filled spark switches
30 of 100
Analysis in circuit breaker performance requirements for high-voltage DC networks
31 of 100
Inactivation of foodborne pathogenic and spoilage microorganisms by 405 nm light : an investigation into potential decontamination applications
32 of 100
Addressing sustainability of off grid power in developing countries : a case study of Malawi
33 of 100
An experimental approach into the degradation of wind turbine blade coating systems due to rain and weathering
34 of 100
Accelerated gradient techniques and adaptive signal processing
35 of 100
Snap : A distributed authentication protocol
36 of 100
Novel methods for enhancing accuracy and stability of power hardware-in-the-loop simulations
37 of 100
Small signal impedance modelling and stability assessment of HVDC systems
38 of 100
Cellular MIMO Networks (CeMNets) : the channel modelling, decomposition and information theoretic perspectives
39 of 100
Knowledge-based analysis of partial discharge data
40 of 100
A multi-agent system for automated post-fault disturbance analysis
41 of 100
Improvement of heat-led CHPs based upon ORC-technology
42 of 100
Investigation of surface discharge along interface between liquid and nanocomposite
43 of 100
Indoor navigation efficiency improvement in intelligent assistive systems (IAS) using neural networks
44 of 100
Constrained adaptive natural gradient algorithms for adaptive array processing
45 of 100
Applications of programmable MEMS micromirrors in laser systems
46 of 100
Voltage and pH monitoring of electrochemical cells
47 of 100
Modelling techniques for 1-3 composite transducers
48 of 100
Acoustic-based machine learning diagnostic tool for voice disorders
49 of 100
Advances in tunable diode laser spectroscopy using residual amplitude modulation techniques
50 of 100
Dynamic analysis of a spar-type offshore floating wind turbine and its mooring system
51 of 100
Novel ultrasonic transducers and array designs using self-similar fractal geometries
52 of 100
Design of an intelligent system for validation of protection settings
53 of 100
Resolution improvement in acoustic holography using aperture expansion techniques
54 of 100
A data analytic approach to automatic fault diagnosis and prognosis for distribution automation
55 of 100
Engineering synthetic biology routes for protein analysis using microfluidic systems
56 of 100
Dynamic phasor modelling of VSC FACTS devices for small signal stability studies
57 of 100
Improving fault location through interpole analysis of circuit breaker and automatic reclose scheme operation
58 of 100
Future power system dynamic frequency response under high penetration levels of wind
59 of 100
Generation system reliability with wind and solar power
60 of 100
Acoustic-based assistive technology tools for dysarthria managment
61 of 100
Microactuators and their application in micro-opto-electro-mechanical systems (MOEMS)
62 of 100
Emotion recognition in video using deep learning method with subtract pre-processing
63 of 100
Multi-scale metrology for automated non-destructive testing systems
64 of 100
Operation and assessment of wind energy on power system reliability evaluation
65 of 100
Peak-ratio analysis method for enhancement of LOM protection using M class PMUs
66 of 100
A model-based alarm processor for the assessment of protection systems performance
67 of 100
On a dual wavelength optical sensor system for measuring strain and temperature simultaneously in tokamak port plug
68 of 100
Regulated generation allocation and operation optimization for networks with new variable independent power production and self-generation
69 of 100
Image analysis on hyperspectral corneal epithelium injuries using a new image enhancement and a novel mixing kernel
70 of 100
New methods for protection of future power networks incorporating high penetrations of distributed generation
71 of 100
Dynamic response of spar-type offshore floating wind turbines
72 of 100
Enhancing signal to noise ratio for electrostatic transducers
73 of 100
Cost of energy modelling and reduction opportunities for offshore wind turbines
74 of 100
Dynamic reconfiguration methods in FPGA-based softawre defined radio system for wireless mobile standards
75 of 100
Extensions of the hit-or-miss transform for feature detection in noisy images and a novel design tool for estimating its parameters
76 of 100
Congestion management and LMP
77 of 100
Partial discharge ageing of polymer insulation under combined AC and DC stress at elevated temperatures
78 of 100
A new approach to partial discharge measurements for testing electrical insulation systems
79 of 100
Control and operation of offshore wind farms connected with diode rectifier HVDC systems
80 of 100
A new method for harmonic penetration study in power networks with renewable generation
81 of 100
Feeder reconfiguration on distribution network considering harmonics
82 of 100
Development of high power fibre amplifier components, systems and applications
83 of 100
Pulsed electric field treatment of Arthrospira platensis and Saccharomyces cerevisiae
84 of 100
Optimisation of 405 nm HINS-light technology for the development of patient-safe decontamination in arthroplasty surgery
85 of 100
Optimisation of a power distribution network's active power loss and reliability performance
86 of 100
Radiometric partial discharge characterisation
87 of 100
Registration of pre-operative lung cancer PET/CT scans with post-operative histopathology images
88 of 100
Control design and energy optimisation of a buoyant airborne wind turbine
89 of 100
Copulas for image processing
90 of 100
Optimal load management of a microgrid with an electric boiler and renewable generation
91 of 100
Pulsed MOSFET based linear transformer driver
92 of 100
Gaussian process models for SCADA data based wind turbine performance/condition monitoring
93 of 100
Design and operation of Low Frequency AC (LFAC) transmission system for connecting offshore wind farms
94 of 100
A multi-objective optimisation approach to the network arrangement of flexible heat demand
95 of 100
Ultrasonic sensor platforms for Non-Destructive Evaluation
96 of 100
Multi-objective network planning for the integration of electric vehicles as responsive demands
97 of 100
An integrated framework for finite element modelling of ultrasonic inspections of carbon fibre reinforced polymer components
98 of 100
Optimal operation an sizing of a combined heat and power system integrated with demand side response in a smart energy hub
99 of 100
Current source based wind energy conversion system
100 of 100