Thesis

Investigation of fique fibre mechanical properties and its use as polymer reinforcement

Creator
Rights statement
Awarding institution
  • University of Strathclyde
Date of award
  • 2026
Thesis identifier
  • T18234
Person Identifier (Local)
  • 201958168
Qualification Level
Qualification Name
Department, School or Faculty
Abstract
  • Natural fibres have been part of goods manufacturing for centuries, also as reinforcement of composite materials. Technology and the discovery of new materials displaced them, but challenges of disposal and recyclability of materials, pushed by Western countries’ legislation is making them one of the possible answers in these societies following the example of traditional uses. Their renewability and biodegradability alongside their light weight is making them the focus of research enable them to be used in high technical value applications. Understanding their behaviour and challenges is paramount to bring them as common reinforcements for composite materials. In this work, the aim is to deepen the understanding of fique fibres, in both their physical structure and morphology, and their mechanical properties. It is well known that the cross-sectional area varies from fibre to fibre. Understanding if and how it changes along the same fibre is important for creating models to analyse mechanical behaviours. This is done by an X-ray CT-scan to analyse how the fibre area varies along its length. With the CT-scan this is explored and also used to quantify the porosity of the fibre, obtaining what is the proportion of cell walls in fique. As part of the study of the mechanical properties, the fibre cross-sectional area is calculated in two ways, which gives a further insight on different fibre morphologies and leads to suggestions on what are the better approaches when modelling the fibre shape, showing that although the circularity assumption can be used, it is inaccurate, and how that can impact on the calculation of the mechanical properties. Mechanical properties in natural fibres in general and fique fibre in particular have values that can differ significantly from one another or are calculated from small samples. Not having a value for mechanical properties is a challenge when creating models and predicting properties for composite materials. In measuring the mechanical properties, besides comparing how the two area measurement approaches affects that, the introduction of a direct strain measurement technique to be applied to natural fibres is presented, showing how in shorter fibres induced errors from the equipment become more significant, as well as making non-linearities in the fibres become significant enough to amplify errors in the measured mechanical properties. This leads to recommendations on using longer fibres when possible, especially if using indirect strain measurement techniques. If fibres are short, a direct strain measurement technique is recommended, with direct cross-sectional area measurement to increase accuracy when measuring mechanical properties via tensile testing of single fibres. Wettability of raw fique and chemically and physically treated fique is also studied by the calculation of polar and dispersive components of the surface energy as well as by the measurement of the contact angle between the matrix and the different types of fibres. Recycled polypropylene is the chosen matrix in this work to study fibre-matrix interaction. In order to use fique fibres as reinforcement, they are also thermo-chemically characterized, as is the recycled polypropylene used as matrix. The interfacial properties between the two components are tested via the single fibre fragmentation test with raw fique fibres as well as chemically and physically treated fique fibres, that had also been previously thermo-chemically characterized. The relevance of this lies on the need to understand the interface behaviour and how it can be affected to be improved. The influence of chemical and physical treatments on the composition and the thermal stability of fibres is investigated as well as how that influences their interaction and load transfer capability when in contact with the matrix.
Advisor / supervisor
  • Yang, Liu
Resource Type
DOI
Funder

Relations

Items