Thesis
Study of long-distance high-temperature superconductor cables for HVDC power transmission
- Creator
- Rights statement
- Awarding institution
- University of Strathclyde
- Date of award
- 2025
- Thesis identifier
- T17210
- Person Identifier (Local)
- 202061878
- Qualification Level
- Qualification Name
- Department, School or Faculty
- Abstract
- The carbon neutrality goal of achieving net zero by 2050 has sparked significant interestin offshore wind farms. With offshore wind farms being installed from short distances tolong distances away from the seashore, a submarine power transmission infrastructure isa necessity. Considering power cable length and low net effective losses, a high-voltagedirect-current (HVDC) system has been chosen over HVAC. HVDC cables are consideredto be made out of high-temperature superconductor (HTS) material. HTS power cableshold immense potential for efficient, low-loss, high-current-density, and compact powertransmission. But, unlike copper/aluminium, the HTS material has a sharp transientbehaviour as a function of the operating current, temperature, and magnetic field.However, the susceptibility of HTS cables to faults in the grid, resulting in quenching orpermanent damage due to joule heating, poses a critical challenge to their real-worldresilience.The main aim of this thesis is to study and evaluate the long-distance HTS subsea powercable for offshore to onshore power transmission along the radial and axial direction ofthe 2G HTS power cable in terms of electrical, thermal, hydraulic and quenchcharacteristics during the normal and grid fault conditions. Prior to the installation of longdistance cable experiments and lab prototypes, modelling and simulation work is neededto predict cable behaviour. Furthermore, modelling the HTS power cable was necessaryas part of enhancing cable performance and design. To tackle the problem describedabove, a computationally efficient high-fidelity model over the whole length of the cablewas needed to understand HTS cable characteristics. The complex design of thesuperconductor power cable was modelled using Finite Element Method (FEM).However, for long-distance superconductor electrical-thermal-hydraulic studies, the FEM simulation involves a computational burden and for the electrical network, it is notsuitable.Novel discretised electrical-thermal-hydraulic SIMSCAPE components with non-linearresistive behaviour dependent on current and temperature in MATLAB/SIMSCAPEsoftware were modelled, partitioning the cable into discrete blocks to understand thetemperature along the axial length and to determine the impact of transient conditions ona long-distance superconducting power cable in transmission. The model has theadvantage of having the flexibility to change the fault location and cryocooler spacinglength along the length of the cable, including the HTS and copper former and LN2 layers.The experiment measured the joint resistance of the tape incorporated into the model. Thisstudy is unique in that it is the first to look at 100 km long-distance HVDC subsea HTSfor offshore to onshore grid use capable of transmitting more than 1 GW of power at 100kV voltage and an ampacity of 10 kA. The primary technical challenges in modelling thislong-distance HVDC subsea HTS cable are due to its non-linear resistive properties,which vary with temperature, current, and magnetic field. These variations result in thecable's electrical and thermal behaviour changes along its length, complicating accuratemodelling. Distributed RLC network models are implemented using Simscape cableblocks to address these complexities. Each Simscape block includes thermal, electrical,and hydraulic parameters of respective cable layers, considering conduction, convection,radiation heat losses, non-linear resistance, critical current, and pressure drop andtemperature. It allows the integration of cryocoolers at specific points along the cable. For this study, an HVDC HTS power cable was considered and modelled both as alumped element and as a distributed element model with 100 elements to compare andevaluate the cable parameters along the length. The parameters include temperaturedistribution, resistance, critical current, current, and losses at different spots throughoutthe length of the cable. To simulate the transient condition, a pole-to-ground (PG) fault isconsidered and the current distribution between the copper former and HTS tapes isstudied. Using this cable model, the maximum temperature of the HTS and coolant bothin the superconducting state and transient state has been evaluated and presented.This research is the first to develop a 2D T-A of a subsea HTS cable with a 10-kAtransport current to investigate the electromagnetic behaviour of the superconductor andthe impact of the harmonics generated in the AC/DC converters on the cable. The crosssectional area of the HTS cable was modelled in 2D using COMSOL Multiphysics toexamine harmonic ripple losses in the cable. These findings were further validated throughexperimental investigations on the superconductor tapes.This study underscores the benefits of integrating Superconducting Fault CurrentLimiters (SFCL) with HTS cables in the network, showcasing load sharing between thesuperconductor and copper former during steady and transient state operations, HTSquench and recovery time.
- Advisor / supervisor
- Yuan, Weijia
- Zhang, Min
- Resource Type
- DOI
- Date Created
- 2024
- Funder
Relations
Items
| Thumbnail | Title | Date Uploaded | Visibility | Actions |
|---|---|---|---|---|
|
|
PDF of thesis T17210 | 2025-03-05 | Public | Download |