Thesis

Water to rock? Tufa formation for capture of contaminants in industrial waste leachate

Creator
Rights statement
Awarding institution
  • University of Strathclyde
Date of award
  • 2024
Thesis identifier
  • T17105
Person Identifier (Local)
  • 201972918
Qualification Level
Qualification Name
Department, School or Faculty
Abstract
  • Uncontrolled weathering of legacy industrial waste poses a risk of contaminantleaching into groundwaters and surface waters, leading to widespread exposure toplants and living organisms including humans. This risk would be substantiallyreduced by on-site remediation techniques that would immobilise the leachedcontaminants at the source. Therefore, the aim of this study was to develop a passive,nature-based, low-cost remediation technique that harnesses metal capture duringprecipitation of tufa – a freshwater limestone (CaCO3) that forms in Ca-rich streamsincluding industrial waste leachates.This was achieved by: a) characterisation of the geochemistry and formationmechanisms of anthropogenic tufas (i.e., associated with anthropogenic materials) infour hyperalkaline (pH >10) and one neutral (pH 7-8) industrial waste leachates, b)application of these findings towards developing a tufa-imitating column experimentalsystem that could be eventually applied on-site.The most stable long-term contaminant immobilisation would be in a hard tufa.Both the field study and the experimental work demonstrated that flowing water isnecessary for hard tufa formation regardless of leachate type. However, theanthropogenic tufa study showed that precipitation mechanism depends on leachatetype, which in turn is determined by the type of source waste that also affects therange and concentrations of mobilised contaminants. As a result, the extent of metalcapture effectiveness in anthropogenic tufas is related to leachate composition andpH. These factors control whether the tufa would contain accessory minerals(e.g. carbonates, (oxyhydr)oxides), and whether the contaminants form species thatare effectively removed by these minerals at given pH and tufa formation mechanism.The column experimental system successfully recreated hard tufa formation by CO2ingassing into hyperalkaline streams under controlled conditions, and this engineeredtufa removed metal contaminants (Cu, Ni, Sr, Zn) from solution. These experimentsdemonstrated the importance of balanced Ca concentration, alkalinity, and CO2concentration to achieve CaCO3 precipitation at a stable rate. Importantly, the metalswere found to affect CaCO3 precipitation onset and polymorphism and potentialcoprecipitation of separate minerals. A successful on-site application of theengineered tufa technique would require individual site assessment to determinewhich contaminants pose the highest risk and which tufa formation mechanism would be more effective at decreasing their aqueous concentrations to levels that do notpose environmental risks.
Advisor / supervisor
  • Cumberland, Susan
  • Renshaw, Jo
  • MacDonald, John
Resource Type
DOI
Embargo Note
  • The electronic version of this thesis is currently under moratorium due to copyright restrictions. If you are the author of this thesis, please contact the Library to resolve this issue.

Relations

Items