Index Catalog // STAX

1. Development and investigation of polymeric vascular graft materials

Creator:: Whitton, Andrew.
Date:: 2012
Department, School or Faculty:: Bioengineering Unit.

2. Biomechanics of the forefoot

Creator:: Jacob, Hilaire A. C.
Date:: 1989
Department, School or Faculty:: Bioengineering Unit.

3. Biomechanical model of the shoulder joint

Creator:: Runciman, R. John
Date:: 1993
Department, School or Faculty:: Bioengineering Unit.

4. A study of patient and nurse factors influencing sub-bandage pressure

Creator:: Nelson, E. Andrea.
Date:: 2001
Department, School or Faculty:: Bioengineering Unit.

5. Thermographic studies of tissue trauma and seating

Creator:: Black, Robin Charles.
Date:: 1984
Department, School or Faculty:: Bioengineering Unit.

6. Size-dependent mechanical properties of single polyurethane nanofibres

Creator:: Cardona, Milovan Joe.
Date:: 2012
Department, School or Faculty:: Bioengineering Unit.

7. Development of a biomechanical model of the interface between the residual limb and prosthesis for trans-femoral amputees

Creator:: Lee, Vee Sin Peter
Date:: 1996
Department, School or Faculty:: Bioengineering Unit.

8. The production and control of functional electrical stimulation swing-through gait

Creator:: Heller, Benjamin Wolf
Date:: 1992
Department, School or Faculty:: Bioengineering Unit.

9. Paraplegic standing and reciprocal gait using a floor reaction hybrid F.E.S. orthosis

Creator:: Barnett, Robert W
Date:: 1990
Department, School or Faculty:: Bioengineering Unit.

10. Blood response to biomaterials, in vitro and clinical investigation of the contact phase of blood coagulation

Creator:: Matata, Bashir Mnene
Date:: 1995
Department, School or Faculty:: Bioengineering Unit.

11. The biomechanics of the human foot

Creator:: Walker, Lloyd T.
Date:: 1991
Department, School or Faculty:: Bioengineering Unit.

12. The biomechanical basis of spinal manual therapy

Creator:: Lee, Raymond Y. W
Date:: 1995
Department, School or Faculty:: Bioengineering Unit.

13. The step test for biomechanical assessment of human locomotion function

Creator:: D'Angelo, M. D
Date:: 1980
Department, School or Faculty:: Bioengineering Unit.

14. The application of silicone gel for the treatment of hypertrophic scars and burn wounds, and consideration of the "ideal" burn dressing

Creator:: Quinn, Karen J.
Date:: 1986
Department, School or Faculty:: Bioengineering Unit.

15. Biomechanical study of upper limb activities of daily living

Creator:: Cheng, Pei Lai
Date:: 1996
Department, School or Faculty:: Bioengineering Unit.

16. Biomechanics of the upper limb, applications of motion analysis and force measurement techniques

Creator:: Chadwick, Edward K. J.
Date:: 1999
Department, School or Faculty:: Bioengineering Unit.

17. Carbon dioxide transfer in membrane oxygenators and associated membranes

Creator:: Wong, Peter.
Date:: 1984
Department, School or Faculty:: Bioengineering Unit.

18. A theoretical approach to the prediction of haemolysis in centrifugal blood pumps

Creator:: Bludszuweit, Catrin
Date:: 1994
Department, School or Faculty:: Bioengineering Unit.

19. Optimising drug release from coronary stents, a role for conducting polymers?

Creator:: Chaudri, Omar Ali.
Date:: 2012
Department, School or Faculty:: Bioengineering Unit.

20. Plasticised poly(vinyl chloride), significance of plasticiser and surface modification for protein adsorption

Creator:: Zhao, Xiaobin
Date:: 1999
Department, School or Faculty:: Bioengineering Unit.

21. The biomechanics of the acetabulum and acetabular replacement

Creator:: Noble, Philip C
Date:: 1995
Department, School or Faculty:: Bioengineering Unit.

22. Movements of the cervical spine observed by diagnostic ultrasound

Creator:: Ruston, Sally A.
Date:: 1988
Department, School or Faculty:: Bioengineering Unit.

23. MRI brain tumour classification using image processing and data mining

Creator:: Shen, Shan.
Date:: 2004
Department, School or Faculty:: Department of Electronic and Electrical Engineering. and Bioengineering Unit.

24. Controlled pulsatile architecture in cardiopulmonary bypass, in-vitro and clinical studies

Creator:: Gourlay, T.
Date:: 1997
Department, School or Faculty:: Bioengineering Unit.

25. A three dimensional mathematical model of the human knee

Creator:: Papaioannou, George
Date:: 1999
Department, School or Faculty:: Bioengineering Unit.

26. Design principles for controllers of externally powered knee mechanisms for trans-femoral amputees

Creator:: Altan, Baran
Date:: 2009
Department, School or Faculty:: Bioengineering Unit.

27. The effects of prosthetic alignment on the stability of the knee in above knee amputees

Creator:: Marmar, Zuheir
Date:: 1993
Department, School or Faculty:: Bioengineering Unit.

28. A posture control model and balance test for the prediction of relative postural stability, with special consideration to the problem of falling in the elderly

Creator:: Maki, Brian Edward.
Date:: 1987
Department, School or Faculty:: Bioengineering Unit.

29. Contributions of posture and deformity to the body-seat interface conditions of a person with spinal cord injuries

Creator:: Hobson, Douglas A.
Date:: 1988
Department, School or Faculty:: Bioengineering Unit.

30. Comparison of biomechanical and proprioceptive function following resurfacing arthroplasty and standard total hip replacement

Creator:: Wells, Julie.
Date:: 2009
Department, School or Faculty:: Bioengineering Unit.

31. The influence of limb alignment on the gait of above-knee amputees

Creator:: Yang, Lang.
Date:: 1988
Department, School or Faculty:: Bioengineering Unit.

32. The influence of polypropylene ankle-foot orthoses on the gait of cerebral palsied children

Creator:: Meadows, Christopher Barry.
Date:: 1984
Department, School or Faculty:: Bioengineering Unit.

33. Non-invasive monitoring of glucose and lactate in humans by reverse iontophoresis

Creator:: Ching, Congo T. S.
Date:: 2005
Department, School or Faculty:: Bioengineering Unit.

34. Inactivation of microorganisms isolated from infected lower limb arthroplasty using High-Intensity Narrow-Spectrum (HINS) light

Creator:: Gupta, Sanjay.
Date:: 2011
Department, School or Faculty:: Department of Electronic and Electrical Engineering. and Bioengineering Unit.

35. The effect of chemical fixation on the structural properties of human collateral knee ligaments

Creator:: Salem, Abdurahman M. M.
Date:: 2009
Department, School or Faculty:: Bioengineering Unit.

36. Gait study of dysvascular lower limb amputees in early stage of rehabilitation

Creator:: Pillu, Michel J.
Date:: 2000
Department, School or Faculty:: Bioengineering Unit.

37. Contribution of cortico muscular synchrony to human movement and its potential use in neuroprosthetic control

Creator:: Stamatopoulos, Vasileios G
Date:: 2005
Department, School or Faculty:: Bioengineering Unit.

38. Validation of a navigated hip replacement surgery system

Creator:: Arumapperuma Arachchi, Shanika Mihirani.
Date:: 2012
Department, School or Faculty:: Bioengineering Unit.

39. A pilot study comparing the performance of the microprocessor-controlled RHEO knee and the 3R80 hydraulic knee

Creator:: Kjartansdóttir, Fanney Blöndahl.
Date:: 2012
Department, School or Faculty:: Bioengineering Unit.

40. The tribological significance of the joint fluid analog in a hip joint simulator

Creator:: Good, Victoria D
Date:: 2001
Department, School or Faculty:: Bioengineering Unit.

41. Ankle joint biomechanics

Creator:: Procter, Philip.
Date:: 1980
Department, School or Faculty:: Bioengineering Unit.

42. Comparison of the primary stability and seating force of two uncemented cup designs used for total hip replacement

Creator:: Antoniades, Georgios Andreas.
Date:: 2012
Department, School or Faculty:: Bioengineering Unit.

43. Hip joint forces, hip joint forces of 40 to 60 year old normal and total hip replacement subjects during walking and stair, ramp and camber negociation

Creator:: Stansfield, Benedict William.
Date:: 2000
Department, School or Faculty:: Bioengineering Unit.

44. Evaluation of a flexible goniometer with a view to developing a hip dislocation articulation alert system

Creator:: Frame, Scott.
Date:: 2009
Department, School or Faculty:: Bioengineering Unit.

45. Elbow joint prosthesis design, biomechanical aspects

Creator:: Nicol, A. C.
Date:: 1977
Department, School or Faculty:: Bioengineering Unit.

46. Biomechanics of the ankle joint complex using a muscle model assisted optimisation model

Creator:: Jenkyn, Thomas R.
Date:: 2001
Department, School or Faculty:: Bioengineering Unit.

47. Towards a tri-leaflet polyurethane heart valve prothesis

Creator:: Mackay, Tom G.
Date:: 1992
Department, School or Faculty:: Bioengineering Unit.

48. Assessment of movement in the elderly during sleep with reference to pressure sore prevention

Creator:: Wheatley, David Christopher
Date:: 1982
Department, School or Faculty:: Bioengineering Unit.

49. A theoretical investigation of inversion layer transducers (ILT) for ultrasonic skin thickness measurement

Creator:: Estanbouli, Yasser
Date:: 2004
Department, School or Faculty:: Centre for Ultrasonic Engineering., Department of Electronic and Electrical Engineering., and Bioengineering Unit.

50. The hip joint capsule, Mechanical properties and contribution to joint stability in total hip replacement

Creator:: Apatsidis, Dimitrios P
Date:: 2002
Department, School or Faculty:: Bioengineering Unit.

Search Constraints

Search Results

1. Development and investigation of polymeric vascular graft materials

2. Biomechanics of the forefoot

3. Biomechanical model of the shoulder joint

4. A study of patient and nurse factors influencing sub-bandage pressure

5. Thermographic studies of tissue trauma and seating

6. Size-dependent mechanical properties of single polyurethane nanofibres

7. Development of a biomechanical model of the interface between the residual limb and prosthesis for trans-femoral amputees

8. The production and control of functional electrical stimulation swing-through gait

9. Paraplegic standing and reciprocal gait using a floor reaction hybrid F.E.S. orthosis

10. Blood response to biomaterials, in vitro and clinical investigation of the contact phase of blood coagulation

11. The biomechanics of the human foot

12. The biomechanical basis of spinal manual therapy

13. The step test for biomechanical assessment of human locomotion function

14. The application of silicone gel for the treatment of hypertrophic scars and burn wounds, and consideration of the "ideal" burn dressing

15. Biomechanical study of upper limb activities of daily living

16. Biomechanics of the upper limb, applications of motion analysis and force measurement techniques

17. Carbon dioxide transfer in membrane oxygenators and associated membranes

18. A theoretical approach to the prediction of haemolysis in centrifugal blood pumps

19. Optimising drug release from coronary stents, a role for conducting polymers?

20. Plasticised poly(vinyl chloride), significance of plasticiser and surface modification for protein adsorption

21. The biomechanics of the acetabulum and acetabular replacement

22. Movements of the cervical spine observed by diagnostic ultrasound

23. MRI brain tumour classification using image processing and data mining

24. Controlled pulsatile architecture in cardiopulmonary bypass, in-vitro and clinical studies

25. A three dimensional mathematical model of the human knee

26. Design principles for controllers of externally powered knee mechanisms for trans-femoral amputees

27. The effects of prosthetic alignment on the stability of the knee in above knee amputees

28. A posture control model and balance test for the prediction of relative postural stability, with special consideration to the problem of falling in the elderly

29. Contributions of posture and deformity to the body-seat interface conditions of a person with spinal cord injuries

30. Comparison of biomechanical and proprioceptive function following resurfacing arthroplasty and standard total hip replacement

31. The influence of limb alignment on the gait of above-knee amputees

32. The influence of polypropylene ankle-foot orthoses on the gait of cerebral palsied children

33. Non-invasive monitoring of glucose and lactate in humans by reverse iontophoresis

34. Inactivation of microorganisms isolated from infected lower limb arthroplasty using High-Intensity Narrow-Spectrum (HINS) light

35. The effect of chemical fixation on the structural properties of human collateral knee ligaments

36. Gait study of dysvascular lower limb amputees in early stage of rehabilitation

37. Contribution of cortico muscular synchrony to human movement and its potential use in neuroprosthetic control

38. Validation of a navigated hip replacement surgery system

39. A pilot study comparing the performance of the microprocessor-controlled RHEO knee and the 3R80 hydraulic knee

40. The tribological significance of the joint fluid analog in a hip joint simulator

41. Ankle joint biomechanics

42. Comparison of the primary stability and seating force of two uncemented cup designs used for total hip replacement

43. Hip joint forces, hip joint forces of 40 to 60 year old normal and total hip replacement subjects during walking and stair, ramp and camber negociation

44. Evaluation of a flexible goniometer with a view to developing a hip dislocation articulation alert system

45. Elbow joint prosthesis design, biomechanical aspects

46. Biomechanics of the ankle joint complex using a muscle model assisted optimisation model

47. Towards a tri-leaflet polyurethane heart valve prothesis

48. Assessment of movement in the elderly during sleep with reference to pressure sore prevention

49. A theoretical investigation of inversion layer transducers (ILT) for ultrasonic skin thickness measurement

50. The hip joint capsule, Mechanical properties and contribution to joint stability in total hip replacement

Limit your search

Type

Resource type

Creator

Contributor

Department, School or Faculty

Date